0
What else can I help you with?
How do you change the fan belt pulley on a 1996 dodge ram 1500 318?
To change the fan belt pulley on a 1996 Dodge Ram 1500 with a 318 engine, first disconnect the negative battery cable for safety. Next, remove the serpentine belt by releasing the tension from the serpentine belt tensioner. Once the belt is off, unbolt the fan belt pulley from the water pump or alternator, depending on which pulley you are replacing, and replace it with the new one. Finally, reattach the serpentine belt and reconnect the battery cable.
1996 gmc sierra with a 350 vortec you have a squeak with you thought was the serpentine belt So you changed it and it quit Then the next day it came back Could it be that a pulley is loose- off time?
you have to determine which pulley it is. if the sweak is consistent, it could be the tensioner, water pump, well these are the first to go. the serpentine doesnt control timing. and loose is a possibiity.
Where is the water pump on a 2001 expedition?
The water pump mounted on the front of the engine, with a drive pulley attached to the pump hub. The serpentine belt usually drives the pulley.
Is the pulley that the serpentine belt is on connected to the water pump on a 1991 Chrysler new yorker?
On a 3.3l the water pump is driven by the serpentine belt. On a 3.0l the water pump is driven by the timing belt.
Where is the water pump 06 montycarlo?
Behind the water pump pulley. The water pump is small so the water pump pulley covers the entire pump so you can't see it. Once you remove the serpentine belt and the water pump pulley, the pump is easily accessible.
Replacing the Alternator on Pontiac Grand Prix GTP. And its really the belt that is giving me trouble. Not sure where the tension pulley is?
On my '92 it is below and behind (towards the back of the engine) the water pump. It can be easily recognized on most cars because it's only pulley that rolls on the BACK of the serpentine belt; a BRILLIANT idea if you ask me.
Can replacing the water pump and serpentine belt in 2004 jeep wrangler make turn signals malfunction?
Replacing the water pump and belt should not affect turn signal operation.
Is a 2000 s-10 4.3litre water pump standard or reverse rotation?
The water pump would be a standard rotation. The serpentine belt moves clockwise on the model truck which would make it standard not reverse. With a serpentine belt system like the one in the 2000 S10 4.3, any pulley that is grooved turns clockwise. Any pulley that is smooth turns counterclockwise. The water pump pulley on that S10 is smooth and turns CCW.
Where is water pump located on 2003 dodge grand caravan V6 3.3?
Rear most and lowest pulley on the serpentine belt.
Do you place the serpentine belt over or under the water pump on a 1997 Chevrolet Monte Carlo?
It goes underneath the water pump and around the next pulley.
What is the path for the serpentine belt on the 01 Taurus?
should be a sticker on fan shroud Alternator, idler pulley, power steering, a/c, tensioner pulley, crankshaft pulley, water pump this is the order cant upload the picture but when placing the belt on if the pulley has the grooves in it the grooved side of the belt should face the pulley and if the pulley is smooth then the back of the belt faces the pulley
How do you know if your keyless remote to your car has water damage?
if replacing the battery doesnt fix it.
