Something is wrong with the Anti - lock Brake System . It could be a fuse , a
sensor , or some other problem . As long as the BRAKE light in your dash is not
lit up you still have " normal " brakes
On a 2000 Ford Expedition the ABS Relay problem is a problem with the braking system. Either the ABS Relay needs to be replaced or the brake pads are worn down. The ABS Relay is located in the fuse box that is on top of the battery in the engine compartment.
A 2004 Ford Expedition would have four wheel ABS brakes
If you disconnect the ABS module, the system will default to conventional brakes, but the ABS light will be on.
If your ABS light is staying on , a malfunction has been detected with the ABS system It could be a fuse , or a sensor , or something else . Now that the ABS light is on , the Expedition can be scanned for any trouble codes to help diagnose the problem
A malfunction has been detected with your anti-lock braking system ( could be a bad fuse , a sensor problem , or something else )
Wheel speed sensors, or your ABS Sensor on rear axle housing if so equipped
A malfunction has been detected - get it checked out
The manual say's fuse 15 and 23 for a 2000 expedition.
How do you clear the abs light on a Ford E-150 van year 2000. Light stayed on after replacing the front brakes.
Bring to a shop that has an ABS scanner to determine problem
a blown fuse ,or speed sensors at wheels could be damaged or disconnected, check connections under hood on inner fender for possible connection issues
A problem with the Antilock Brake System has been detected . It could be a fuse , a sensor , or some other problem . As long as the red " BRAKE " light in your dash is not on you still have " normal " brakes