0
Is that a question? They work because that's the way your terrible car was designed to work? Do you mean HOW do they work?
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is it when the brake lights on a 1994 Oldsmobile cutlass supreme don't work?
One of two things. Either the brake light switch behind the brake pedal. Or try wiggling or rotating your turn signal stalk in a circle motion. If the brake lights work when the turn signal stalk is wiggled then you need to replace the turn signal stalk.
Brake lights out on 95 Olds Cutlass Supreme. Turn signals work and fuse is good. Brake switch checks out good also. Any thoughts on where I am loosing power?
its in the steering colume replace the turn signal switch
Why won't rear brake lights work on 1995 Cutlass Supreme?
It may be the turn signal switch located under the horn in the steering wheel. Try holding up the turn signal lever with your left hand and apply the brake. See if that helps.
How do you release parking brake on 1997 olds cutlass supreme if emergency brake cable is broke?
If the cable is broken and parking/emergency brake is still ON, then they are rusted in place ! - Your emergency brake system needs urgent work.
How do you change the brake light switch on 1991 Cutlass Supreme if the brake lights stay on constantly?
just had something similar like this done, they had to replace the wire harness inside steering wheel, because its all electrical. one of my turning signals and left side of brakes and back window light would not work.
Can the brake lights not work and the night lights work same bulb?
my back brake lights don't work, but the brake light on the back door does what could be wrong
Why won't your 1996 Oldsmobile Cutlass Supreme shift out of park?
There seems to be a safety switch system, the brakes must be applied to release the transmission from park. Don't know location of linkage, if mechanical or electrical. Assembly could be in transmission of console. If no joy, then check wiring and connectors. Do brake lights work - then brake switch probably ok.
Brake lights don't work when the brake is pushed. Work with headlights on only.?
The brake lights and the tail lights are separate circuits. Check the brake light fuse, then check the brake light bulbs, then check the brake light switch.
What would make your brake lights not work?
The most likely cause is a bad brake light switch (if none of the brake lights illuminate) but if its only one of the brake lights, try changing the bulb. Even if they still work as running or turn lights because they have a double filament and may still work partially, but not as brake lights.
The brake lights dont work on my 1989 Mercury Grand Marquis but all other lights work?
change the brake lights check the fuse check the brake light swtch
Why would the tail lights work on a 1990 jeep Cherokee but the brake lights don't work?
check the fuse for the brake lights, they have thier own. also check the brake light switch at the at the top of the brake petal
My brake lights or turn signals don't work on my Cadillac deville?
How do you replace brake lights
