try turning the ignition on(leaving vehicle off) and press the manual override button that is installed inside the vehicle once(if not, press the button keep it press and turn on the igniion).the light should go off. and you'll be set.
You need to have the ABS system scanned with a computer to determine the reason for the light staying "on"
how do you reset the alarm system service light on a 2001 volvo s80
Theft alarm/ chipped key system malfunction.Theft alarm/ chipped key system malfunction.
The alarm warning light in your 2002 Mazda Protg is an indication that the alarm system is deactivated. Remove the alarm fuse, for 10 seconds. Put the fuse back into its original slot.
This can vary based on the type of alarm and manufacturer. Refer to the user manual for your alarm system to troubleshoot any possible problems with your alarm.
the wires to the bulb is one reason among others. the wires to the bulb is one reason among others.
The brake light staying on indicates a problem with the brake system, usually low fluid. Check the brake fluid and if it is low, then look for a possible leak in the system or worn brake pads as the fluid had to go down for a reason
The blinking alarm light on the instrument cluster can indicate a few different issues. It may signify a malfunction in the vehicle's alarm system, such as a faulty sensor or wiring problem. Alternatively, it could be a reminder of a security feature, such as key fob detection or an unarmed alarm system. If the light persists without any alarms, it's advisable to consult the vehicle's manual or a professional mechanic for diagnosis.
if the red light is on your system is probaly not active right now and is turned off.
It is an indication of a problem in the chipped key or theft alarm system.It is an indication of a problem in the chipped key or theft alarm system.
A red circle warning light is an indication of a malfunction in the theft alarm or Sentry key (chip key) system.A red circle warning light is an indication of a malfunction in the theft alarm or Sentry key (chip key) system.
Check the door light switches. One could be going bad and triggering the alarm.