0
I've found lots of answers to my questions on the internet so here's my 2 cents. I've had drums turned in the past at shops because it's usually around 1/3rd the price of buying new drums. Also your neighborhood brake and tire place will usually have the right equipment to do the job for you.
What else can I help you with?
How do you turn brake drums on a 1999 Ranger?
Remove the drums and take them to an auto parts store that has a brake drum lathe.
Do brake drums need to be replaced after being saturated with brake fluid?
No, the drums can be cleaned with brake cleaner.No, the drums can be cleaned with brake cleaner.
Why do you turn or reface a brake drum?
Normally a brake drum is turned or resurfaced using a brake drum lathe. This is usually done at a shop specializing in brake repair, or at a machine shop. Those who have a suitable metal lathe can also turn brake drums.
How do you remove brake drums without a tool?
If you are inexperienced, you should not be messing around with the brake drums.
How long does it take to brake in new brake drums?
New brake drums are broken in the first time you go for a drive usually.
How do you remove the rear brake drums on 1998 Pontiac sunfire?
brake drums should pull off if not rusted on.
How are the brake drums and shoes replaced on a 1995 Camry V6?
Remove the wheels from your 1995 Toyota Camry. Remove the brake pads by removing the brake pad Springs. Tap on the brake drum with a hammer or mallet. Slide the brake drums off. Reverse the process to install the new brake drums and shoes.
Where is the wheel cylinder located on a 1995 chrysler cirrus?
It is inside the rear brake drums. It is the part that pushes the brake shoes out against the drum.It is inside the rear brake drums. It is the part that pushes the brake shoes out against the drum.
What shops resurface brake drums?
Almost all Auto Parts stores and machine shops resurface rotors and brake drums.
Do new brake drums need to be cut?
Brake drums can not be cut. The shoes inside can be replaced.Only disc brakes(rotors) can cut.
How do you replace rear brake drums for 1999 Chevy Venture?
i was wondering how to change rear brake drums for 1999 Chevy venture
How do you adjust the rear brake drums on a Toyota tundra?
To adjust the rear brake drums on a Toyota Tundra, first, lift the vehicle and remove the rear wheels to access the brake drums. Locate the adjusting screw through the access hole in the backing plate; use a flathead screwdriver to turn the adjuster wheel. Turn it clockwise to tighten the brakes or counterclockwise to loosen them until the brakes lightly contact the drum. Finally, reassemble the wheel and lower the vehicle, ensuring that the brakes function properly before driving.
