0
Why would a 2002 Pontiac Grand Am have a security system malfunction in it that would make it create a code to not let it start?
After you try to start it and it doesn't start leave the key in the on position and you will see the security light is blinking. It will continue to blink for 10 minutes and then stay on solid for 30 seconds. Once it has stayed on for 30 seconds it will go off, this is when you can turn the key off and start it. Mine usually starts then but sometimes you have to go through the process again. Hope this helps!
answerTry this, if you take it to the dealer it will cost you $480.00 or more. I did this last night 8/4/06 and it worked. It's called ignition relearn security code. I have a 2001 Pontiac Grand Am GT. It started to act up during the initial start up about 2 weeks ago, then yesterday morning, got in the car and it failed to start. It tried, but it sounds like it was cut off of fuel and therefore no start. That's your security anti theft mode that kicked in. I have lot's to tell you, but read the instructions below and it will fix your problem. Take note: if this fails after a few attempts of this process, then the key tumbler ignition might be bad, not that your key is bad, but the security recognition is failing, therefore a dealer item will face you for this repair!
Step 1: Get in the car and put the key in the ignition. Try to start the vehicle (note:it will not start) Leave the key in the on position and get out of the car. (note: make sure you leave a door window down just in case it locks) Wait 10 minutes.
Step2: Get back in the car and try to start the car 4 or 5 times. (note: it will not start, this is a reset process) Now turn the car key to the off position and do not remove the car key!!! Get out of the car and wait 10 minutes.
Step 3: Get back in the car, note: you might see something different, your security light blinking on your radio, this is a good sign! now turn the key to start the car. It should start up. Turn off, take key out and put it back in and try to start the car again. It should start again, if it does, your successful!!!!
What else can I help you with?
1993 Pontiac Bonneville security system?
How to override the security system
How do you reset security on 2001 Pontiac Bonneville?
To reset the security system on a 2001 Pontiac Bonneville, insert the ignition key and turn it to the "On" position (without starting the engine). Leave it in this position for about 10 minutes until the security light turns off. Afterward, turn the key to the "Off" position, wait a few seconds, and then attempt to start the vehicle. If the security system continues to malfunction, consider consulting the owner's manual or a professional mechanic.
How do you reset security system on 1998 Pontiac Bonneville?
how do i restate my security system in my 2000 Bonneville
What is code P0440 on a 1998 Pontiac booneville?
Trouble code P0440 means:Evaporative emission control system malfunction
In Windows Vista you can create to reset your system in the case of a malfunction?
restore points
Does the 2003 Gran Prix have a security system?
The 2003 Pontiac Grand Prix does come with a factory security system installed. If your security system is enabled it should have a "security" light that flashes when the key is turned on.
What does a p0410 code Pontiac Montana 2000 means?
Trouble code P0410 means:Secondary air injection system malfunction
P0446 engine light on your Pontiac gran am?
Trouble code P0446 means:Evaporative emission control system vent control circuit malfunction
If the security system has a problem on your Pontiac Grand Am does it shut the gas pump off?
Yes. When your GM security system activates, it disables fuel delivery to prevent startup.
Can the factory security system on a 1999 Pontiac Grand Am GT be disabled and if so how?
Pull the fuse.
How do you reset theft system 98 Pontiac Bonneville?
If the key for the Pontiac has a security chip in it as well, simply wait about fifteen minutes without doing anything and then your car should start. If the key does not have a security chip you may have to remove the battery to reset the system.
Why is the alarm panel beeping?
The alarm panel is beeping to alert you of a potential issue or alarm activation, such as a breach in security or a system malfunction.
