answersLogoWhite

0

What else can I help you with?

Related Questions

Will a 2005 Chevy Cobalt ss supercharged engine fit in the mounts in a Chevy Cobalt ls?

Yes. The block itself is exactly the same as is the transmission mount locations. there are many things that are different electronically between the two motors and computers however.


Will a 2.2 engine from a 1996 cavalier work with a transmission from a 1997 cavalier z24?

No....The engine mounts are in the wrong place.


Engine swap cavalier 2.2 1997 for 2000?

You can swap the engine from your 1997 Cavalier 2.2 liter engine to your 2000 Chevy Cavalier. The wiring harness and motor mounts should be in exactly the same.


How do you put a 3800 supercharged in a fiero?

To install a 3800 supercharged engine in a Pontiac Fiero, you'll need to start by preparing the Fiero's engine bay and ensuring the engine mounts are compatible. You'll typically use an adapter plate to fit the engine, along with custom mounts. It's important to modify the wiring harness and install a compatible transmission, usually from a 4T65E or similar, to handle the power. Finally, you'll need to address cooling, exhaust, and fuel system upgrades to support the supercharged engine's performance.


Will Chevy cavalier 2.2 l engine fit into s-10 pickup?

The Chevrolet Cavalier 2.2 liter engine will fit into a Chevrolet S 10 pickup. You will need to change the motor mounts on the Cavalier engine in order for the engine to bolt in properly.


Will a 91 Chevy Cavalier engine fit in a 94 Chevy Cavalier?

if it is the same motor yes, but some may have different mounts or wiring plugs


Will a 2.2 ecotec motor out of a 2007 cobalt fit the mounts of a 2004 cavalier with the same 2.2 ecotec motor?

no. they are both 2.2 eco techs but they have different transmissions. the 2007 cobalt will have 9 bellhousing bolts and the 2004 cavalier will have 7. the cobalt will run a 3 wire hall effect crankshaft sensor and the cavalier runs a 2 wire permanent magnet sensor. this means a different reluctor  wheel and therefore it wouldn't run anyways without the cobalt harness and tranny.


Can a 1994 cavalier 3.1 Lt engine fit into your 1998 cavalier?

yes, it can work however your going to need the engine, transmission, ecu, wiring harness, and bcm, and someone who knows how to fabricate new engine mounts and trans mounts, its quite a costly engine swap, but with lots of money and time just about anything can be done


Why is your 1998 cavalier sputtering?

A Cavalier can sputter do to a number of things. Cars sputter due to bad spark plugs, bad compression, broken engine mounts, or even a failing catalytic converter.


Where would cause the engine to rock hard when put into drive on a 2001 Chevy Cavalier?

You need to check all of the mounts. Get a manual to show you where they are.


How many Mounts on a 98 cavalier and what are they called?

There are a total of 3 engine/transmission mounts for the 1998 Cavalier with the 2.2 liter engine. There is an upper motor mount on the passenger side toward the front of car next to the coolant reservoir. There is a lower dogbone mount underneath the a/c compressor. and lastly, there is a transmission mount on the driver's side. It is held in place by a bracket.


How many motor mounts in a Chevy Cavalier?

3