im wondering the same thing but i thin k it will
yes
No.
Your answer is NO... The F550 & F450 use a 10 bolt patern and the F250 & F350 use an 8 bolt patern.
only if the f250 is a dually to but otherwise no because the front and rear wheels are offset on the dually
And does the Overall Length as listed in the Ford specs include the tailgate when it is down?
No, the Ford 2008 Running Boards will not fit on a Ford F-250.
Yes you can
It depends on year, because there was a light duty F250 prior to the latest series of Super Duty (F250+) which started in 1999. There is a huge difference in frame/driveline between an F150 and the F250/F350. 1999 to 2004, the difference between the F250 & F350 was minimal, the GVWR of the 250 was 8800lbs & the 350 (not dually) was 9900lbs. 2005+ saw the GVWR's increase significantly. The dry weight of a crew cab diesel F250/F350 with 8' box and 4x4 is in the mid 7000lbs range. The F150 SCREW (not sure on this) would likely weight in the mid 6000's. Ton's of other differences but too much to get into here.
A fuel bowl is usually used to desbribe the part of a carburetor where the floats are and a 2008 f250 is fuel injected, not carberated
yes they are the same 8 lug pattern
I think they will should be the same axles
to replace tail light lens on a ford pickup. lower tailgate on side of bed that is hidden when tailgate is closed, you will see 2 screws. remove these screws and you can pull tail light out of bed.