0
Yes, a Chevy 350 motor can bolt onto a Chevy M30 transmission, as they share the same bellhousing pattern typical of GM small-block engines. However, ensure that the specific M30 model is compatible with the 350's torque and horsepower output. Additionally, you may need to consider the necessary modifications for the drivetrain and other components to ensure proper fitment and functionality.
What else can I help you with?
Can a Chevy 350 bolt onto a manual 1991 Chevy v6 transmission?
Yes it will.
Will a th400 transmission bolt onto a gm 305 small block?
as long as it is a chevy bolt pattern th400
Will a Chevy 350 transmission bolt on a 350 Chevy motor?
It will bolt onto EVERY small block V-8 engine from 1999 down to the first Chevy small block ever made. WE really need MORE information on what you are doing are trying to do. The YEAR, and model will really make a difference on what you are doing.
Will a Chevy 4-speed manual 4x4 transmission from a 350 bolt onto a Chevy 454 motor for my 85' Chevy?
bell housing are the same for bbc and sbc. clutch will need to be correct and check the mounting location lengths compared to the bellhousing for fitment.
Will a 1998 Chevy Suburban transmission bolt onto a 2003 Chevy 3500?
NO IT WILL NOT.... You MUST stay under the year of 2000 to get the right 1
Can an Oldsmobile turbo 350 bolt onto a sbc350 motor?
Not usually. Most of the transmissions that have the Oldsmobile bolt pattern do not have the Chevrolet bolt pattern.
How do you fix the wiper arm on a 2000 Chevy S-10?
There will be a cover on the end where the arm connects to the motor. If you remove that small plastic cover there is a 13mm nut threaded onto a bolt. If you remove that bolt and other hardware that follows you can easily remove the wiper arm.
Will a1989 4cyl 5 speed 4x4 transfer case bolt onto a 2wd trans?
The transfer case will not bolt to a 2wd transmission.
Will a 700r4 transmission from a 89 Chevy pu fit in a 89 Chevy pu 4x4?
The transmissions that are made for a 4x4 has a longer center shaft in it so the trans-fur case will bolt onto it. The 2-wheel drives have a short shaft cause there's no need for a transfur case.
Where is the neutral safety switch on a Chevy 2003 s 10?
It is mounted on the drivers side of the transmission were the shifter cable bolts onto the transmission.
What manual 4 speed manual transmission fits easily onto a 350 motor?
the tremec or muncie
Where is the torque converter located at on a 98 Chevy pickup?
It's between the engine and transmission. It slides onto the input shaft of the transmission and bolts to the flexplate on the engine.
