0
What else can I help you with?
Will a 350 Chevy flex plate work on a 250 ci 6?
NO.
Will a 168 Tooth Flex plate work with a 700R4 Transmission?
Yes, a 168-tooth flex plate can work with a 700R4 transmission, provided that the engine it is mated to is compatible with that flex plate. The 700R4 typically requires a specific flex plate to match the engine's starter and flywheel specifications. Always ensure that the flex plate is designed for the engine and transmission combination you are using to ensure proper fit and function.
Can one missing license plate light cause the other not to work in a 2002 Chevy blazer?
no.
Can you install an after market flex fan blade to a 1998 Chevy Tahoe fan clutch The Tahoe is reverse direction does that make a difference?
There is a difference, it will not work.
What size flex fan do you need for Chevy 350?
Flex fans don't work very well on 350's. If you must use one, get the biggest one you can find. Better off to get an electric fan of at least 1600 cfm.
Can the small Chevy starter work with 153 tooth flexplate on a zz4 crate motor?
You can use either flex plate you prefer on most Chevy's, the only diff with the larger one (168) is you will have to use a different starter. I think most all blocks are drilled for the small, some both, but very few (400's for example) large only. (rear 2 bolt holes diff locations) You should get a dual pattern plate though (6 holes) regardless of size so you can mate with any Chevy trans.
What if the new license plate bulb still don't work on 2004 Chevy trailblazer?
I would check the fuses.
Does growth flex really work?
No.
Are flex government employees eligible for health benefits When?
Flex time employees that work a full work week are entitled to the same benefits as any other employee working a traditional work week.
How do you change Torque converter?
major job for the inexperienced you must first remove the transmission then you remove torque converter from flex plate. flex plate is equivalent to a fly wheel in a standard gear box to replace torque converter, is another job in itself as it must be installed loosely until transmission is installed , then properly filled with transmission fluid then tightened properly if not sure about all this, it is likely to not work or fail going down the road WAIT!, ..unbolt the torque converter from the flex plate and remove with the transmission! If you pull the transmission separately, you risk damaging the pump in the transmission! Same applies going back in, the torque converter needs to be meshed into the front pump of the transmission before putting into the car. Then once the transmission is bolted to the engine, THEN you bolt the torque converter to the flex plate. If you do as described in the first answer, you will very likely end up replacing the entire transmission! This job requires experience and special tools, not for the beginner.
Are the bolt patterns for a 1994 Chevrolet 350 and a 1971 Pontiac 350 the same?
Absolutely not. The only trans that will bolt to a Chevy is a Chevy. The old BOPC will all interchange with each other. The only way to make that work is an adapter plate.
Does Flex belt really work?
No. The flex belt does not work. All it does is make a small amount or muscle contract repeatedly by a small amount and that all adds up to minimal calories burned. The muscles you work and the force you use (calories) to work them during a simple brief walk will burn more calories in five minutes than a flex belt will burn in a day.
