Yes , the " BRAKE " light in your dash lights up if the emergency / parking
brake is on or if the brake fluid level is LOW in the brake master cylinder in the
engine compartment
The brake light on most vehicles is not only an indicator that the parking brake is on, but that there is a problem with the system.
probably the parking brake indicator
usually the parking brake sensor is malfunctioning [or the fluid is low check this first]
Is the brake fluid level LOW in the brake master cylinder in the engine compartment ?
Check the switch and/or make sure the parking brake pedal is all the way up if it is not that might be air in your brake lines or leak
The parking brake is only ONE of the triggers for the dashboard brake warning light.Before referring you to the "Related Questions" below, I'd suggest checking the brake fluid levels.
This light is used for 2 different purposes.(1) If the brake fluid is low,this light will come on.(2) light will come on when you engage the parking brake.
The parking brake light comes on when you engage the parking brake. Pull the parking brake release handle. ------------------------------------------------------------------------------- the brake light also comes on if the brake fluid level in the brake master cylinder is low ( in your engine compartment )
Could be, Low on brake fluid, Parking brake not fully retracted, Problem with the brake system, Have a trusted mechanic inspect the brakes soon.
The red brake indicator light on a Mini Cooper typically signifies a critical issue with the braking system. This could indicate that the parking brake is engaged, or it may signal low brake fluid levels, worn brake pads, or a malfunction in the braking system. It's essential to address this warning immediately to ensure safe driving and avoid potential brake failure. If the light remains on after releasing the parking brake, it's advisable to consult a mechanic.
Check your brake fluid level, it's probably low that's why it is giving you that warning...
AnswerIndicator light on dash? Check fluid level in master cylinderMake sure parking brake is fully releasedCheck Brake fluid levelI have a 1996 Tacoma 2.7L and my brake indicator light on the dash is always on. So- here's how to check what's wrong... Start truck, release parking brake, if light is on, push the parking brake handle in/towards dash, if light goes off then you have a bad spring (like my truck does) or the like on the parking brake handle. That's all. Sometimes when I drive, I push it in/light goes off and then the handle works it's way out again and the light comes back on.