15 mm
The oil drain plug for a 2006 Chevy Cobalt typically requires a 15mm socket for removal. It's important to ensure you have the correct size to avoid stripping the plug. Always use a torque wrench to tighten the plug to the manufacturer's specifications after changing the oil.
If it's the "oil" drain plug, the size wrench is, better yet use a socket wrench=13mm.
The oil drain plug uses a 13 mm wrench.
If the drain plug is original equipment, it takes a 17mm wrench or socket.
the drain plug is located on the back side of the oil pan under the car.
To remove a drain plug, locate the plug underneath the sink or tub, use a wrench to turn it counterclockwise, and then pull it out.
15mm
To remove the oil drain plug from a 2008 Dodge Avenger, you typically need a 13mm socket or wrench. It's advisable to ensure the vehicle is properly lifted and secured before attempting to remove the plug. Always check the specific vehicle manual for confirmation, as variations may exist based on the engine type.
You souldnt do an oil change by yourself if your not knowledgable enough to find the oil drain plug/bolt. Have a mechanic do it for you.
in the oil pan
It don't have 1.
The original engine oil drain plug wrench size should be 15mm.