fleetwood 94 /96 5.7 liter igniton coil location standing in front of car with hood up, on right side of motor . look for short spark plug wire. a black small looking coil with alittle sensor behind it. i changed mine on my 1994 fleetwood . look for short 2,3 inch plug wire. in that area front of motor where valve cover is .
http://en.allexperts.com/q/Cadillac-Repair-806/88-caddy-brougham.htm ... http://www.troublecodes.net/GM/ ... http://myweb.accessus.net/~090/cadidiag.html Just been looking for a friend this morning
looking for vin number on fleetwood camper
Contact Fleetwood directly. They can look up all the specifications of your vehicle by looking up the VIN number.
You can get the information for the Cadillac SRX by going to Cadillac's website and looking under the options tab for the SRX.
16.7 feet or 200.9inchs
Cadillac XLR
One can get a Cadillac lease from the General Motors website and looking at the Cadillac links. One can locate a Cadillac dealer close to them in order to get a lease. One can also get them from the 'Lease Trader' website.
On a 1993 Cadillac Fleetwood, the heater relay is typically located in the engine compartment, specifically in the fuse box or relay center. You can find it by opening the hood and looking for a rectangular black box near the firewall. Consult the diagram on the inside of the fuse box cover for the exact location of the heater relay. Always ensure the vehicle is off and properly cooled before inspecting or replacing any relays.
If one is looking for the location of Heritage Cadillac it can be found online and in the yellow pages of phone books. Heritage Cadillac is located in Lombard, IL and in Morrow, GA.
a 93 caprice doesn't use a hub assembly per se. It uses a spindle, cone style bearings and a rotor held on with a castle nut. The "hub" is a part of the rotor. If it is the Spindle you are looking for, and 91-96 GM B-body spindle will work. This includes Caprice sedan and wagon, Vista Cruiser wagon, Roadmaster sedan and wagon and Fleetwood.
yes