answersLogoWhite

0

Yes there is a AC clutch fuse located in the engine compartment. It is a 10 amp fuse' check your manual it will tell the location. If that fuse is blown and continues to blow fuses the have the coil in the compressor checked, also the pressure switch.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Can you replace the air conditioner compressor clutch on a 2003 jeep liberty without replacing the entire compressor?

It is possible to replace the air conditioner clutch without replacing the entire compressor if you can find somewhere that sells just the clutch assembly and can get the appropriate tool to remove the pulley to get to the clutch. Try buying a repair manual and looking in there.


How do you install a clutch on a 2001 Honda 400ex?

Are you replacing a whole clutch or just the clutch plates?


How do you repair a clutch on a 91 Ford Festiva?

Depends on what exactly is wrong with it :) Unless it is about simply replacing or adjusting the clutch cable, replacing the clutch involves removing transmission out, which means taking the axles out etc.


What if your 1987 Chevy s10 clutch is not engaging how can you fix that?

If the clutch was not disengaging I would say the clutch master is empty of hydraulic fluid, this would be a result of a leak in the master or the slave cylinder. If the clutch is not engaging I would suspect the clutch disc has shredded in which case the clucth assembly would have to be replaced.


Should you replace your clutch master cylinder when replacing clutch?

At least the slave cylinder. The clutch master cylinder can be replaced at any time.


Can you replace the AC clutch on a 2004 Honda accord without replacing the compressor?

My car is going through the same issue with the A/C. You CAN replace the compressor clutch without replacing the compressor, but the caveat is that you can't tell if the compressor is any good without a clutch. So basically you are gambling that the compressor will still be good by only replacing the clutch. Hope this helps!


Why will a 1989 Nissan Pickup Truck not take the gears after replacing the clutch?

If a 1989 Nissan Pickup Truck is not engaging gears after a clutch replacement, it could be due to incorrect installation of the clutch components, such as misalignment of the clutch disc or pressure plate. Additionally, issues with the hydraulic system, such as low fluid levels or air in the lines, can prevent proper clutch operation. It's also possible that the clutch master or slave cylinder is faulty. Finally, ensure that the transmission linkage is correctly adjusted and functioning.


Why does AC blow warm air had compressor replaced last year?

Clutch engaging/charged- (freon) I would check those things next. If you are low R12, you might have a bad o ring somewhere.


Where is the ac clutch on a 94 Lincoln mark 8?

The clutch is mounted on the front of the A/C compressor.


Do you step on the clutch while starting a car?

Yes, most newer cars have a clutch safety switch that prevents the starter from engaging if the clutch isn't depressed.


What would cause gears to grind?

your clutch may not be fully engaging


98 cavalier clutch pedal sticks in the down position?

clutch needs replacing good luck! not a fun job