answersLogoWhite

0

They are two separate circuits. Check the 4 way fuse then check the 4 way flasher relay.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

The turn signals on your 97 continental stopped working after you had a little trouble turning on flashers High beams were slow to react but now they and flashers are good-no turn signals tho-any idea?

You may have a relay problem your flashers and turn signal are on different relays or there could be a problem with the wiring in the steering column that goes to the turn signal


What would cause the turn signals and emergency flashers to stop working on a 2003 JEEP Wrangler X. I checked the fuses and bulbs and they are good.?

turn signals and emerg flashers work off a flasher can. go to any auto store and buy a new one they are cheap and easy to replace


Why flashers and signals don't work on Chevy impala 2004?

Defective flasher module - common problem


The turn signals and hazards lights do not work how do you fix this problem?

Could be the bulbs or the fuses or the flashers or the signal switch assembly


Are flashers reqired on motorcycles?

No turn signals are not by law required, as long as you have your headlight, brake light, and you know the hand signals for turning on a bike than you don't need flashers. But if you're not using flashers, you are still required to use hand signals


If Your flashers work but your turn signals don't is the problem in the steering column or is it a relay?

Probably a wiring issue between the turn signal and the lights.


Why dont your turn signals and emergency signals work?

If the turn signals and emergency signals don't workout sounds like an electrical problem's would suggest that you take it into the closest shop to get the problem diagnosed properly.


What is the problem if the turn signals work but the hazards do not?

Often, a separate flasher unit is used to activate the hazard flashers. This unit might be bad, or the switch to activate the hazard flashers might be bad. answer always there are 2 flashers.one for turn signals other for hazard replace hazard flasher They have separate fuses also.


98 buick lesabre flashers work but turn signals don't. what do i try next?

what do i try next? i tried a new flasher on the steering column. my flashers work, but turn signals don't.


Flashers work turn signals dont fuse is good on 1995 s10 blazer-what's wrong?

because there are two diffrent flashers 1 for the flashers and 1 for turn


Why does the emergency lights work and the blinkers don't on a 1991 mustang?

this car may have separate flashers for the turn signals and the emergency flashers


Why does your emergency flashers work on your 93 g20 Chevy van but not the turn signals?

There are two relays, one for the emergency flashers, and one for the turn signals. Your turn signal flasher is defective and needs replacing.