Often, a separate flasher unit is used to activate the hazard flashers. This unit might be bad, or the switch to activate the hazard flashers might be bad.
answer
always there are 2 flashers.one for turn signals other for hazard replace hazard flasher
They have separate fuses also.
you have a bad turn signal flasher.
Your problem is most likely the turn signal relay im having a problem similar to yours but when my signals wont work neither do my hazards
Could be the bulbs or the fuses or the flashers or the signal switch assembly
hazards and turn signals have separate flashers. replace flasher for turn signals
this may be a relay problem just a guest but the turn signals and the hazards carry separate ts switch on most vehicle (not all)
not sure what causes it, but sometimes my signals will just not work. with lever still in position to activate signal, push button for hazards. then put signal lever in "off" position. turn off hazards. signals should work. temporarily anyway.
Could be turn signal flasher Could be problem with switch in steering column Could be turn signal flasher Could be problem with switch in steering column
Check the fuses and the flasher unit.
Look at the relay for the flashers, that should fix your problem.
There are two flashers, one for the hazards and one for the signals.
If the turn signals are inoperative check the hazard switch, if the hazards don't work replace the hazard switch, the signals will start working. if the hazards are ok ,the turn signal switch may be bad.
Turn signals and hazards are two separate curuits. Check/replace your signal light fuse and flasher.