Had this problem with my 95. You need to remove the pad that sits over the airbag, and use an ohm meter to check if either of your horn switches are shorted. Most likely, one is and you can bypass it while retaining the functionality of the other. Not a job i would recommend for the do-it-yourself-er. Take it to the mechanic for this one
== Another possibility is that your horn pad expanded in the heat- happened to me. It, unfortunately, involves replacing the entire airbag assembly. Very costly, and if you attempt it yourself, get a HAYNES manual to disable the airbag.
how do you replace a ignitionswitch tumbler 1991 buick skylark
Ignition what? Switch? Coil?
Do you mean the main switch by the driver or the switch on the door itself?
How do remove and replace the ignition switch of a 1983 Oldsmobile Regency?
How do you remove and replace wiper switch on 2002 Chevy Cavalier
First remove the steering wheel, remove the torx screws and remove the house, remove the signal switch and the wiper switch, remove the torx screws and?æremove the ignition switch. Put in the new switch and replace everything in reverse.?æ
Remove the airbag and steering wheel, remove the torx screws from the steering housing and remove the housing, remove the screws from the signal and wiper switch, and remove the screws above the ignition switch and remove the switch. Replace the switch and replace everything in reverse.Ê
Remove the knobs, remove the dash panel, and replace the switch.
Remove the dash bezel, remove the switch, reverse process with new switch.
remove ignition switch 92es300
Remove the door panel. Remove the switch retainer. Remove the wiring harness. Reverse the process to install the new switch.
== ==