If it is a thermoplastic then applying heat will soften it to allow for bending.
I can give you several sentences.If you soften the wood in water, you can bend it more easily.She planned to soften him up by making his favorite foods.Our new lotion softens your skin better than any other.
Up to about 180-200 F degrees before it starts to bend or soften
Glass bends when heated because the heat causes the molecules in the glass to vibrate more rapidly, changing its structure. This change in structure leads to expansion, causing the glass to soften and bend. This effect is known as thermal expansion.
No. This was said by William Congreve. The full quote is, "Music hath charms to soothe the savage beast, to soften rocks, or bend a knotted oak."
*Your best choice is to have your physician or physical therapist help fit your daily-use cane. If no professional help is available, these instructions will assist you in creating a comfortable fit. 1) Buy a Stylish Cane from http://www.canescanada.com (CanesCanada.com) 2) Put your normal walking shoes on. ***PLEASE do not use high heel shoes when walking with a cane unless your physician states that you can. 3) Have another person help you, and make sure you are on solid ground. * not carpet but hard wood, concrete or tile. Hard solid ground. 4) With your arms at your sides, stand erect and have the other person place the cane upside down next to the side of the body on which you will be using the cane. In most cases, the cane is placed on the side opposite to your injury. Please consult your physician if you are unsure. 5) Bend your elbow about 15 degrees and have th other person mark the cane in the center of the bend of your wrist. (15 degrees is 1/6 of the arc your arm swings from vertical up to horizontal.) 6) While gripping the shaft of the cane (NOT the handle) twist the rubber tip from the end of the cane. 7) Cut the cane with a fine tooth hacksaw at the marked point. then replace the rubber tip back onto the bottom of the cane. 8) The cane height should give you a slight bend to your elbo so you have a bit of a "lift off" 9) REMEMBER MEASURE TWICE! CUT ONCE .. you can not add on to your cane if you cut it to short. 10) Congratulations! You look Marvelous and now you "Walk with Style(r)" *Caution, people will come up to you to ask where you bought your stylish cane! All copyrights and trademarks are the property of Canes Canada Inc. Not portion of this document may be reproduced without the express consent of Canes Canda Inc.
To soften palm tree leaves, you can soak them in warm water for several hours to help break down the fibers and make them more pliable. Alternatively, you can gently steam the leaves for a few minutes, which also helps to soften them. After soaking or steaming, it's advisable to gently bend and manipulate the leaves to achieve the desired flexibility. Always handle the leaves carefully to avoid tearing them.
The temperature at which steel starts to bend, known as the bending temperature, depends on the type of steel. Generally, steel begins to soften and lose its strength at temperatures above 400°C (750°F) and can start to bend under the application of force at even higher temperatures.
Yes, wood can bend under hot water due to the heat causing the wood fibers to become more pliable and flexible. This process is known as steam bending, where the wood is heated with steam to soften it and then bent into the desired shape before it cools and sets.
The opposite of soften is - harden
The cane beetle is a kind of beetle that eats sugar cane. It is the reason why they introduced the cane toad.
No, the word soften is a verb (soften, softens, softening, softened); to make something soft. Noun forms for the verb to soften are softener, an agent used to soften; and the gerund softening, the act of making soft.