Try turning the steering wheel back and forth I made a new key, the other one was worn out. Wiggleing the steering wheel is nessisary, but now it's not as often. You might also try a little shot of graphite into the switch. I have to do that every 6 months or so on mine. I had the same problem. What I did was pop off the steering column cover and just move the little lever that is connected to the cable. It doesn't look very nice, but it works every time.
does not have one, it is DIS distributorless ignition system.
no, it will not. A Samurai and a Tracker are different body styles. The Suzuki Sidekick is the same body style as the Geo Tracker and those hard tops are interchangeable.
Defective ignition switch.
== ==
I have the same problem, going to have a locksmith make sure its the ignition switch and cylinder and just not a key problem or a tumbler problem.
Our 1995 Tracker Sidekick has a spare on the rear door , it has a tire lock that your ignition or door key should unlock, however our keys do not fit the lock. I may have to drill or grind it off and replace it with anotherone
How do replace the ignition switch on 1995 Honda Civic EX with a manual tranny. I was wondering if it is pretty much the same as the 1995 Accord.
1995 ford 350 1 ton box truck ignition replacement
(1995) ( Geo) ( tracker ),the wheel light comes on with the hubs locked in and the shifter in , but the 4 wheel drive does not appear to be locking in.
You need to get the rotor off to replace studs with new ones.
Just above the ignition coil on the firewall just in front of the driver
Check local library for service manuals
what is an ignition actuator i work on Chevrolet and have never heard of it are you talking about the switch
i have 1995 4x4 geo tracker with a bad auto transmission will a auto transmission out 1998 4x4 geo tracker fit in 1995
Disconnect the battery. Remove the ignition coils. Remove the ignition control module that was under the coils, and replace it.
By taking it to a GM certified auto technician.
You will need to remove the retaining ring at the top of your 1995 Dodge Grand Caravan ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.