A good place to start would be to pull the starter out and have it tested. Here most auto parts stores will test a starter for free.
If you don't have fire at the plug, change the crank sensor first, then the coil.
If yo have power to both wires at the starter when trying to crank, the starter is failed.
You will need to determine if is a spark problem or a fuel problem then take it from there.
Check your fuel pump/filter located in the fuel tank Cost of parts about $175-200 U.S.
The crank sensor on a 2001 Malibu is located on the bottom of the engine near the crank shaft. It monitors the rotation and speed of the crank shaft.
If it blows when trying to crank the engine, the starter is probably the failure.
How do you replace crank shaft sensor on 2005 Chrysler 2005 300c?
where is the crank positioning sensor on a 1996 newyorker van
No.
No.
Yes
where is the crank sensor located on my 1997 Chrysler sebring lxi
No crank sensor, only a cam position sensor.
Turn key off, then back on and crank. There is not reset switch on a Chrysler.
No.
established equal rights for women
Possibly the crank sensor or the coil pack is dead. But with a dead crank sensor you also get no spark, no crank. No crank equals no fuel delivery.