answersLogoWhite

0

your fuse is to strong try a lower fuse or some other one is wrong sending too match power that why to blows, or is your headlight cracked?

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Where is the function flasher in a car?

It makes the signals and the hazards flash.


My turn signals don't work on my 1994 Jeep Cherokee Sport but my hazards do. I've checked my all my fuses so what could the problem be?

Did U checked the turn ligths flasher, switch and wiring?


Why won't my turn signals come on at all on my 1993 Cadillac Allante but my hazards still work?

Turn signals and hazards are two separate curuits. Check/replace your signal light fuse and flasher.


Why do hazards work but turn signals don't?

For most vehicles the hazards and signals are two separate circuits, they have separate fuses and separate flashers. Check your signal light fuse and signal light flasher.


Why does the turn signals not work on your 1990 geo metro you've replaced switch and checked all bulbs hazards work?

Look at the relay for the flashers, that should fix your problem.


What would cause the Turn signals to quit working and all other lights work hazards work also Changed turn signal switch this is for a 1988 GM sierra and Checked all fuses and flasher uit?

Blown fuse or bad flasher unit. Often, cars use different flasher for the turn signals and the flasher, so it is possible for the hazards to work and not the turn signals.


Turn signals don't work hazards do on Dodge Durango?

Check the fuses first of all. I think the Durango has two flashers as well, one for the hazards and one for the signals so it could be a bad flasher.


What to do when turn signals and hazards don't work?

Check the fuses and the flasher unit.


How do you fix the turn signals on the early version 2001 Passat?

If the turn signals are inoperative check the hazard switch, if the hazards don't work replace the hazard switch, the signals will start working. if the hazards are ok ,the turn signal switch may be bad.


Why are 1994 Geo Metro turn signals and hazards not working?

If you haven't checked the fuse box do so, it's under the dash on the drivers side. If the fuse isn't blown, don't know


My hazards work but turn signals dont in a 1987 acura integra checked the fuses and the relay but still not working?

It could be the turn signal bulbs, some vehicles use separate bulbs for the hazard and turn signals. It could also be a bad switch or wires for the turn signals.


You have 1991 Acura Integra turn signals but no hazards?

Bad switch? Bad hazard flasher?