0
Yes. Make sure you strip all clear finish off down to bare wood and stain. You can re-stain with same or darker color tone, but can't go lighter in tone. In order to go lighter you have to plane the wood down past the stain penetrating layer. good luck with your project.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is the best mixture of linseed oil and wood stain to finish a new pine door?
Add the wood stain to the linseed oil until you have reached the desired color for your new door. Be sure to test the stain on the same kind of wood as the door so you will know the true color once you apply it to the door.
How do you re stain a mahogany door that is already sealed?
You can't stain a door that is already sealed. You have to first remove the sealer down to bare wood so that the stain can penetrate into the wood to the color desired, then reseal with a polyurethane or spar varnish.
Do you need to paint fiberglass door?
Fiberglass is dangerous. You have to have a confined set-up to work with it and spray it in a waterfall booth. This is so that the water catches the fibers in a drain and doesn't release them to the environment You can either paint it or woodgrain it. If you want to paint it, just prime it and paint it like it was a steel door. Woodgraining the door requires gel stain and a graining tool. The Zar brand does a lot of advertising on HGTV (well, at least they did) to claim it has the only system to use to woodgrain a fiberglass or steel entry door, but there are several gel stain systems out there and all of them work.
How do you remove polyurethane from a stain door without removing the stain?
You don't. You will most likely have to restain after stripping.
What primer do you use to paint over a brown stained door?
depends on what color you are painting it ... generally you would want to paint it white... i would go with a clear coat of primer first and then some white.... then two to three coats of white paint. Any good quality oil or shellac based primer will do, however it is best to give the door a good sanding first.
Anyone have an allergic reaction to using Cabot Australian Timber Oil stain?
Just stained s door, and no reaction at all.
What is the best mixture of linseed oil and wood stain to finish a new pine door?
Add the wood stain to the linseed oil until you have reached the desired color for your new door. Be sure to test the stain on the same kind of wood as the door so you will know the true color once you apply it to the door.
How do you re stain a mahogany door that is already sealed?
You can't stain a door that is already sealed. You have to first remove the sealer down to bare wood so that the stain can penetrate into the wood to the color desired, then reseal with a polyurethane or spar varnish.
Is painting a door a physical change?
Painting a door is a physical change because the appearance of the door was changed. It is not a chemical change because it didn't chance its composition. After painting the door it still remained a door, just a different color.
How do you refinish old interior doors?
If you have solid wood doors, first strip your door down to the bare wood. Next sand your door with 120-150 grit sand paper with the grain of the wood. Now you can stain your door with a custom color stain if you choose. Last put some sort of a finish on your door after your stain has dried completely. Any part or all of this work can be done for you at a reputable furniture refinishing shop.
Can you stain a bedroom door if woodwork is painted?
yes you can stain it with a glaze.
Can you change colors in Paper Mario?
You can not change the color of Mario in the original Paper Mario, but you can change your color in Paper Mario The Thousand Year Door
Do you need to paint fiberglass door?
Fiberglass is dangerous. You have to have a confined set-up to work with it and spray it in a waterfall booth. This is so that the water catches the fibers in a drain and doesn't release them to the environment You can either paint it or woodgrain it. If you want to paint it, just prime it and paint it like it was a steel door. Woodgraining the door requires gel stain and a graining tool. The Zar brand does a lot of advertising on HGTV (well, at least they did) to claim it has the only system to use to woodgrain a fiberglass or steel entry door, but there are several gel stain systems out there and all of them work.
How do you remove polyurethane from a stain door without removing the stain?
You don't. You will most likely have to restain after stripping.
Can you stain a white door?
If the door has a primer or a paint on it then no. Stain needs open grain to work. Stain seeps into the pores of the wood. If there is a coating, i.e. the primer or paint, then the stain will have nowhere to go. It will just sit on top of the coating until it is wiped off or dries in ugly blotches.
Aq worlds how to change color of your armor?
you can only change your color if it says (color custom) on the item. If it says that, go to yulgar's inn, up the stairs and into the first door that says 42. Then pick the color or colors you want.
How do you clean an egg stain from concrete and a painted metal door?
to get an egg stain off of a concrete driveway, go to your local pool supply and get a bottle of muratic acid.be careful not to get any on yourself, children or pets. pour the acid on the stain and let set,if you desire, you could use a stiff broom to get the stain off. as for the door, it will need to be sanded and re-painted, if you have thew same paint on the door, you can just redo the area where the stain is at
