If you mean an oil based polyurethane, no, it will dry too hard and will chip off over time and normally isn't meant for exterior work. A better option would be to use a 100% acrylic clear polyurethane, paint or solid stain. They are adhesive enough to adhere to vinyl Fencing or decking and will flex during freeze/thaw cycles.
Yes, you can use polyurethane on painted glass. It is recommended to use the spray rather than dip though because it will be easier. +++ Test on a small, discreet area first to ensure the polyurethane's solvent won't attack the paint.
Any good polyurethane varnish.
I use oil base enamel with oil base polyurethane. Tip: Make sure you allow it to dry completely before you apply top coat. Good luck.
Parquet acn usually be Sanded, rent a floor sander, work from coarse to fine grit.. if it's in pretty good shape & just needs a clear coat.. As the Rental place about "Screening" vs sanding.. faster & less work.. Then you can stain or no stain Then you will want to apply a good floor finish like polyurethane Stop by the paint counter at any home center & look for the guy with the most gray hair, ask him what to use & HOW to apply it.. Wool applicators are good, ask they will explain..
A coat of shellac can be placed over polyurethane. You should use de-waxed shellac if you plan on placing more polyurethane on in the future.
No, polyurethane is meant to be applied to a porous surface. Pergo is laminated and has none. Using the product will cause permanent damage.
Laminated flooring can usually be bought at any local home improvement store for cheap, depending on the kind of laminated flooring and whether you want it installed for you or not.
Laminated floating flooring offers benefits such as durability, easy installation, low maintenance, and a wide range of styles to choose from.
Polyurethane laminated products can be machine washed @ 40'C and in accordance to ISO 6330:1984.
Yes.
It is one made espically for laminate flooring as few are, and stanley is one of the best companies for electric power tools.
Never heard of anythying by that name. Kinda sounds like you are mixing some terms you heard. Uncut Sheet flooring would be 12' wide Vinyl roll goodswhich are not actually laminated but printed. Laminate (Laminated) flooring is rigid and usually about 8" wide & 3-4' long and clicks together. It is made in the same process as an old formica countertop, laminated to a dimensionaly stable backerboard so you can install it as flooring.
yes - of course
Yes, you can apply polyurethane over epoxy as long as the epoxy has fully cured and been properly prepared for the polyurethane application.
Yes, it is possible to apply polyurethane over paint as a protective coating.
No, it is not recommended to apply linseed oil over polyurethane as they are not compatible finishes.
Yes, you can apply polyurethane over epoxy for a durable finish.