Yes, you can. But, I would suggest buying a plastic-safe spray paint. I would recommend Krylon Fusion or Rustoleum paint. You can find these at your local hardware store, Michael's, or Home Depot. But, before you paint them, make sure to cover the trigger, and other parts so they won't get paint on them(the trigger could get stuck). Also, cover up the orange nozzle because that's how the police know it's a fake/nerf gun.
Take some sandpaper and just sand it right off. That's what I did, and it worked. :D
If you mean on top of a spray paiting, just use clear glossy spray paint. Thats what i use as a seal and it works great.
Yes, you can spray a solvent based paint in just about any type of sprayer. You'll want read the instructions on the can, or ask your paint professional which solvent to use for thinning and cleaning.
spray paint will stick to just about anything id suggest some quality cans like monster or sabotage which gives a one coat quality finish...
Use good tape to tape down paper where you don't want paint. lol then go to town.
no u have to wipe the internals, sand it down nd then spray paint it. put at least 2-3 coats on it.
Take some sandpaper and just sand it right off. That's what I did, and it worked. :D
If you mean on top of a spray paiting, just use clear glossy spray paint. Thats what i use as a seal and it works great.
You paint Buzz Bee guns the same way you would paint Nerf guns. You can use spraypaint or just regular paint.
instead of buying a new chandelier that I like so much I would to just spray paint the brass part of it.
Yes you can just make sure the heat of the stove doesn't exceed the maximum heat allowed of the spray paint.
No its just paint but its automotive paint so its hard to get out
Yes. Just be careful to not over do it.
Umm.....well I guess you can just open a sharpie and color it in or you can use a paint marker preferably a paint marker
Yes, you can spray a solvent based paint in just about any type of sprayer. You'll want read the instructions on the can, or ask your paint professional which solvent to use for thinning and cleaning.
just use some spray paint
michaels, target, joanns... or you can just buy the type of box you want and paint/spray paint it red