No! Latex is waterbased, and that doesn't mix with oil based materials. You can't even paint one over the other...
Check out your materials before you start - if you take the right materials and preparations, your work will last much, much longer.
Do you stain over new wood, or over something already stained? New wood is best treated with waterstain first (if you want extra coloring). And in restaining, try to find the same material as it was done with before. If you can't figure out what it is, use a shellac sealer.
You should never paint a deck, the paint will peel (unless you live in a very arid climate I guess. The deck may be stained, you can put either oil or latex stain over old oil stain.
By testing it with denatured alcohol. If the paint comes off on a rag soaked with the alcohol, then it is water based, If not, oil.
Yes solid color stain
Paint covers a surface with a protective film, and stain will penetrate through the wood. Stains are generally considered to be lower maintenance than paint, so stain is a better choice for a deck.
Ensure that it is clean and oil-free; remove any mold or mildew using a bleach solution; allow the surface to dry completely prior to applying your acrylic deck paint.
You should never paint a deck, the paint will peel (unless you live in a very arid climate I guess. The deck may be stained, you can put either oil or latex stain over old oil stain.
can you stain over kool deck pool paint
By testing it with denatured alcohol. If the paint comes off on a rag soaked with the alcohol, then it is water based, If not, oil.
Yes solid color stain
Paint covers a surface with a protective film, and stain will penetrate through the wood. Stains are generally considered to be lower maintenance than paint, so stain is a better choice for a deck.
You can try paint remover or paint the desk color over it.
Use the thinner of that paint and hope it doesn't affect the stain. There is no other way.
Don't paint it when your weather is very hot or very windy. The paint will crack or blister. The wind could blow dust or smething else onto the paint. You can stain it any time. I probably wouldn't stain it if the weather forecast says it will rain tomorrow. Whichever method you select, make sure the deck is clean and dust-free.
Ensure that it is clean and oil-free; remove any mold or mildew using a bleach solution; allow the surface to dry completely prior to applying your acrylic deck paint.
The best deck paint for pressure treated wood is one that is specifically designed for outdoor use and can withstand the elements. Look for a high-quality acrylic or latex-based paint that is durable, UV-resistant, and provides good coverage. It's also important to properly prepare the wood surface before painting to ensure the best results.
To thin deck stain for a sprayer effectively, you can add a small amount of mineral spirits or paint thinner to the stain. Mix it well until you reach the desired consistency for spraying. Be sure to follow the manufacturer's instructions for the specific type of stain you are using.
To ensure a smooth and long-lasting finish when painting a deck, follow these steps during deck preparation: Clean the deck thoroughly to remove dirt, debris, and mildew. Sand any rough or uneven areas to create a smooth surface. Repair any damaged or rotten wood. Apply a wood primer to seal and protect the wood. Choose a high-quality deck paint or stain for durability. Apply multiple thin coats of paint or stain, allowing each coat to dry completely. Consider adding a sealant or topcoat for extra protection against the elements.