Depends on what shape it's in . My experience with it is not good, I often find it poorly applied and flaky. I always scrape it with a wire brush and prime it before applying paint.
Yes, but use good, thick primer first.
No. The whitewash seals the wood and the wood will no longer accept any stain. You could try using a gel stain and create your own grain using an old technique known as graining but this is hard and it doesn't often turn out as good as you would like, especially if you've never done it before. The only way to staiin over whitewash is to strip it completely and then sand off a good top layer since small open grain areas will have absorbed the whitewash down deep. Good Luck.
Yes, it creates a translucent wash similar to a whitewash; however, a better solution would be to use, instead of thinner, a glazing liquid that is the same base as the paint you are using which would provide a much more durable surface.
Typically whitewash is powdered lime (lime as in limestone, not the green fruit!) mixed with water.
Yes, enamel paint will go over flat paint.
you can paint over latex paint with latex enamel.
Yes You can but, You should use a trusted brand i used jerry's Painting supplies and now the house looks wonderful
Whitewash or calcimine is a cheap paint that you can use to cover up nasty stuff like smears, dents, and dirt on the back fence or whatever it is that you're trying to cover up. The dirt has not been removed, it is still there under a fresh coat of paint and so it 'looks' better.
multiply your 1 gallon ingredients by 3
Whitewash was frequently used. Additionally, linseed oil based paints were common.
One can purchase whitewash at many different online retailers. Whitewash can be purchased at your local gardening store. Once can also purchase whitewash at Amazon or eBay.
A calciminer is a person who calcimines - who coats white paint on wooden or plaster surfaces.
No. The whitewash seals the wood and the wood will no longer accept any stain. You could try using a gel stain and create your own grain using an old technique known as graining but this is hard and it doesn't often turn out as good as you would like, especially if you've never done it before. The only way to staiin over whitewash is to strip it completely and then sand off a good top layer since small open grain areas will have absorbed the whitewash down deep. Good Luck.
Typically whitewash is powdered lime (lime as in limestone, not the green fruit!) mixed with water.
Yes, it creates a translucent wash similar to a whitewash; however, a better solution would be to use, instead of thinner, a glazing liquid that is the same base as the paint you are using which would provide a much more durable surface.
I would like for you to whitewash this fence before Tom Sawyer can get back from his lunch with Becky.
There are many Spanish Victom foods in Austalia such as Whitewash cream and Whitewash powder.
you don't you paint over it!! you don't you paint over it!!