answersLogoWhite

0

No. The whitewash seals the wood and the wood will no longer accept any stain. You could try using a gel stain and create your own grain using an old technique known as graining but this is hard and it doesn't often turn out as good as you would like, especially if you've never done it before. The only way to staiin over whitewash is to strip it completely and then sand off a good top layer since small open grain areas will have absorbed the whitewash down deep. Good Luck.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What are the best techniques for applying a whitewash stain to wood furniture for a rustic finish?

The best techniques for applying a whitewash stain to wood furniture for a rustic finish involve diluting the stain with water, applying it in the direction of the wood grain using a brush or rag, and then wiping off excess stain to achieve a weathered look. Sanding the wood beforehand can help the stain adhere better and create a more even finish.


What are the best techniques for applying a whitewash wood stain to achieve a beautiful and even finish?

To achieve a beautiful and even finish when applying a whitewash wood stain, it is best to start by preparing the wood surface by sanding it smooth and clean. Next, apply the whitewash stain in thin, even coats using a brush or rag, working in the direction of the wood grain. Allow each coat to dry completely before applying the next one. To enhance the finish, consider using a wood conditioner before staining and a clear topcoat after staining for added protection and shine.


How do you tone down oak stain?

To tone down oak stain, you can apply a coat of a lighter-colored stain or a tinted topcoat. You can also use a glaze or a whitewash to soften the color of the oak stain. Another option is to sand down the stained surface lightly to remove some of the color before applying a lighter stain.


Where can you purchase whitewash?

One can purchase whitewash at many different online retailers. Whitewash can be purchased at your local gardening store. Once can also purchase whitewash at Amazon or eBay.


How do you stain kitchen cabinets?

The best way to stain cabinets is to apply the stain over shellac then shellac over the stain last step Zip Guard over that to protect surface from moisture damage


Does the stain fade over time?

Yes, the stain may fade over time.


Can you stain over epoxy for a seamless finish?

Yes, you can stain over epoxy for a seamless finish.


What is the formula of whitewash?

Typically whitewash is powdered lime (lime as in limestone, not the green fruit!) mixed with water.


Can you apply oil-based stain over acrylic stain?

No, you cannot apply oil-based stain over acrylic stain. Oil-based stain will not adhere properly to a surface that has been previously coated with acrylic stain. It is recommended to remove the acrylic stain before applying an oil-based stain for best results.


Can you apply water-based stain over oil-based stain?

No, it is not recommended to apply water-based stain over oil-based stain as they are not compatible and may not adhere properly. It is best to remove the existing stain and then apply the desired type of stain for the best results.


How do I use to whitewash in a sentence?

I would like for you to whitewash this fence before Tom Sawyer can get back from his lunch with Becky.


Can you apply stain over polyurethane?

No, it is not recommended to apply stain over polyurethane as the stain will not properly adhere to the surface. It is best to sand down the polyurethane finish before applying stain for better results.