No. The electrostatic process requires a electrical circuit to be made which will not happen on a painted surface.
That is usually called a glaze.
No. The whitewash seals the wood and the wood will no longer accept any stain. You could try using a gel stain and create your own grain using an old technique known as graining but this is hard and it doesn't often turn out as good as you would like, especially if you've never done it before. The only way to staiin over whitewash is to strip it completely and then sand off a good top layer since small open grain areas will have absorbed the whitewash down deep. Good Luck.
Typically whitewash is powdered lime (lime as in limestone, not the green fruit!) mixed with water.
There are some water based coatings that will adhere to an oil based surface without using a primer; however, an oil or acrylic-based primer, used as a bridge, will allow you to paint latex over an oil-base paint trouble free.
No. The electrostatic process requires a electrical circuit to be made which will not happen on a painted surface.
That is usually called a glaze.
To effectively whitewash stained wood, first sand the surface to remove any existing finish. Then, mix equal parts of water and white paint to create a thin whitewash solution. Apply the whitewash with a brush or rag, working in the direction of the wood grain. Allow the whitewash to dry completely before applying additional coats as needed for desired coverage.
To dull a shiny painted surface, you can lightly sand it with fine-grit sandpaper to create a matte finish. Alternatively, you can apply a matte or satin topcoat over the shiny surface to reduce its glossiness.
One can purchase whitewash at many different online retailers. Whitewash can be purchased at your local gardening store. Once can also purchase whitewash at Amazon or eBay.
To make whitewash for painting projects, mix hydrated lime with water until it forms a smooth paste. Add salt to help prevent mold growth and mix well. Apply the whitewash to the surface using a brush or roller, allowing it to dry completely before adding additional coats if needed.
Yes, you can use either latex or oil based primer.
Yes, you can paint over already painted cabinets. It is important to properly prepare the surface by cleaning, sanding, and priming before applying a new coat of paint to ensure a smooth and durable finish.
Yes, applying polyurethane over paint can provide added protection and durability to the painted surface.
No. The whitewash seals the wood and the wood will no longer accept any stain. You could try using a gel stain and create your own grain using an old technique known as graining but this is hard and it doesn't often turn out as good as you would like, especially if you've never done it before. The only way to staiin over whitewash is to strip it completely and then sand off a good top layer since small open grain areas will have absorbed the whitewash down deep. Good Luck.
Yes, oil based paint is very versatile and can be painted over many painted surfaces, including those previously coated with latex paint, as long as the surface is dull and clean.
Yes, you can. Primer will grip to almost any painted surface.