Yes, you could stain vinyl, but I wouldn't. Actually, you could stain nearly anything it just wouldn't always come out the way you hoped. Vinyl would not take a semi-transparent stain the same way wood does. There are no pores or grain patterns to absorb the stain. The results would be a little odd looking. Every nick, scratch, blemish or other imperfection would stand out 100 fold. Your best bet, if you just want to change the color of your deck, would be to apply a solid, non transparent exterior stain or a quality exterior paint. The trick in doing either of those is in the prep. Because the vinyl will oxidize over time it must be removed or sealed out completely before applying a finish. If you take your finger and rub it on an area that gets a lot of sun, you will see the oxidization on your finger. First thing to do is power wash the deck. After it dries you apply a coat of exterior primer/sealer and let that dry. Then you can apply the color of paint you desire and you shouldn't have any problems. Remember, if you want your new deck color to last don't take short cuts in the preparation. Good luck!
Yes.
Can you put stain in polyurethane to darken the color?
you need to wipe the excess stain off the deck with a clean rag. It will never dry and it will float to the top of the sealer
It lasts about 2 years. If the deck is well prepped.
Yes solid color stain
A PVC cleaner will remove oil deck stain from the vinyl part of a window. Pour the cleaner on a clean sponge or rag and wipe in the direction of the grain to remove the stain.
You can use a 100% acrylic solid stain on a vinyl deck without using a primer. It will be opaque, like a paint, but will not mask the texture that gives the appearance of wood.
The cost to stain a deck typically ranges from 500 to 1,500, depending on the size of the deck, the type of stain used, and whether professional services are hired.
If the stain is not too old, vinegar will lift most of it out.
No, you should not apply urethane over deck stain. You should sand down the old deck stain first before applying any other type of finish.
To stain a new deck for optimal protection and longevity, follow these steps: Clean the deck thoroughly to remove dirt and debris. Allow the deck to dry completely before staining. Choose a high-quality deck stain that is suitable for your deck material. Apply the stain evenly using a brush or roller, following the manufacturer's instructions. Allow the stain to dry completely before using the deck. Consider applying a second coat for added protection. Regularly maintain and reapply the stain as needed to prolong the life of your deck.
Deck stain typically needs to dry for at least 24-48 hours before it is safe to use the deck.
The average cost to stain a deck is typically between 2 to 4 per square foot. This price can vary depending on the size of the deck, the type of stain used, and the complexity of the job.
The estimated labor cost to stain a deck is typically between 500 to 1,000, depending on the size of the deck and the complexity of the job.
To effectively stain a deck that is already stained for a fresh and vibrant look, you should first clean the deck thoroughly to remove any dirt or old stain. Then, choose a high-quality deck stain in a vibrant color that complements your outdoor space. Apply the stain evenly using a brush or roller, following the manufacturer's instructions. Allow the stain to dry completely before using the deck.
The best deck stain for optimal protection and longevity is a high-quality, oil-based stain with UV protection. Look for a stain that penetrates the wood to provide deep protection and resist fading and weathering over time. Be sure to properly prepare and clean your deck before applying the stain for the best results.
To clean and stain a deck effectively, start by sweeping or power washing the deck to remove dirt and debris. Use a deck cleaner to remove any mold or mildew, then sand any rough spots. Apply a wood stain using a brush or roller, following the manufacturer's instructions. Allow the stain to dry completely before using the deck.