Baking soda will not work with most dyes. It has the opposite effect, it makes the dye less reactive. For all you wanted to know about dye, see the website I have provided.
In the article you will see the words sodium bicarbonate used instead of baking soda. It is the chemical name for baking soda. Also note, baking soda (bicarbonate of soda is another name for it) is NOT the same as baking powder.
use floursescent markers
No you dont have to, but when you do soak it in soda ash before dying the shirt it will completely hold all the color in. When you dont only a small portion of the color stays in the shirt fibers.
In batik, resist is the wax/beeswax/parrafin you use to keep the dye OFF the piece of fabric. Example: You want to dye a white piece of fabric "green" and leave a white heart on it. You would paint a heart onto the fabric with wax, allow it to dry, dip the fabric in green dye, allow it to dry, remove the wax. At this point, the fabric would be completely green EXCEPT where the wax was. The wax coated the fabric in a heart-shape and caused that heart-shaped section to RESIST being dyed.
I assume you're talking about tie dying. If you're worried about the dye soaking through from one side of the shirt to the other, you can place a piece of cardboard covered with plastic wrap between the front and back of the shirt. If you want an area that resists the dye, to that when you wash the dye out there are areas that have not been dyed, then you need to use a dye resist. There are many kinds, soy, wax, and water based. Water based is the easiest to use but you have to be careful to add dye a little at a time. Flooding the dye piece will wash the resist off too soon. Elmer's blue gel glue is a simple dye resist (make sure it dries for 24 hours before you dye) as are fabric paints (set them with heat before you dye). Also, you cannot soak something with water based dyes in a soda ash presoak. I soak my shirts and then let them dry and then add the water based dye resist. Hope that helps!
You can use a pan lid to put out a fire. If it's a grease fire, you can use lots of baking soda to cover it. However, the best item to complete the job would be a fire extinguisher available at a home store such as Lowe's or Home Depot.
To effectively clean fabric using baking soda, sprinkle a small amount of baking soda onto the fabric and let it sit for at least 30 minutes. Then, use a brush or cloth to gently scrub the baking soda into the fabric. Finally, vacuum or shake off the baking soda residue. This method can help remove odors and freshen up the fabric.
You can use baking soda as a substitute for soda ash in tie dyeing.
If you don't have baking soda for baking, you can use baking powder as a substitute.
The recipe that I use calls for baking soda.
You can use baking powder as a substitute for baking soda in recipes.
i say you use baking soda i use it every time i make cookies
If you don't have baking soda, you can use baking powder as a substitute in baking recipes.
Bicarbonate of soda and baking soda are the same thing. If you are referring to baking powder, please check the provided link which explains the difference between baking soda and baking powder, and what happens if you use them together.
If you don't have baking soda, you can use baking powder as a substitute in baking recipes.
You can use baking powder as a substitute for baking soda if you don't have any.
You should use baking soda when you washing clothes or you can put it in drinks.
Instead of soda ash, you can use vinegar as a mordant for dyeing, particularly with natural dyes. Additionally, baking soda can be an alternative for certain dyeing processes, as it helps to adjust the pH. For some synthetic dyes, a citric acid solution may also work effectively. However, the choice of substitute may depend on the specific dye and fabric being used.