CAN you? Yes, however you shouldn't unless it is well shielded from the sun's UV rays otherwise, it will quickly fade. Also, most interior stain has no mildewcides added so you'd need to apply an exterior clear over the top to slow mildew growth.
I would use a specific deck paint to account for the foot traffic. I don't think regu lar outside paint would cope with it.
You can use a sponge applicator on a broom handle or extension
Use a roller or staining pad to apply the oil or water-based semi-transparent stain. Go in the direction of the grain and do not allow the stain to puddle.
maybe but i havent seen anyone use it
Try using oxalic acid, also called wood bleach, on the water damaged area before attempting to stain the wood. If that removes the stain, sand the surface, use a wood conditioner or a clear stain as a first coat, then apply the colored stain. Once that's dry, apply a clear polyurethane for interior use, or a spar varnish for exterior use.
Yes, you can! A roller may be faster, but many pros like the deeper application afforded by using a brush.
You can use a sponge applicator on a broom handle or extension
cold water will do it do not use hot water it will set the stain
Use gloves and a rag with very hot water.
Use a roller or staining pad to apply the oil or water-based semi-transparent stain. Go in the direction of the grain and do not allow the stain to puddle.
You should seal it. Maybe stain it, too.
Use the thinner of that paint and hope it doesn't affect the stain. There is no other way.
maybe but i havent seen anyone use it
it would be a brush, one with some bristles or something
You can use a 100% acrylic solid stain on a vinyl deck without using a primer. It will be opaque, like a paint, but will not mask the texture that gives the appearance of wood.
You would use SOAP and WATER and wash it in the tub, or outside on the deck. You use a SPONGE and/or a cloth. To dry it you can put it outside and hang it from your deck, and then to get off any excess water you wipe it with a cloth.
Try using oxalic acid, also called wood bleach, on the water damaged area before attempting to stain the wood. If that removes the stain, sand the surface, use a wood conditioner or a clear stain as a first coat, then apply the colored stain. Once that's dry, apply a clear polyurethane for interior use, or a spar varnish for exterior use.
Yes, you can! A roller may be faster, but many pros like the deeper application afforded by using a brush.