Yes, but only if the stain is a few years old and really dry. You have to wash the stain thoroughly to remove the chalked pigments and then prime it to seal the checks in the wood. One disadvantage of stain is that it will not keep the wood from checking as it dries. Either a latex of alkyd primer will work well. You can then paint it with your latex top coat.
Can you put stain in polyurethane to darken the color?
No. You can use lacquer on oil too. Varnish will work well with oil stain as do any of the wax finishes
No, there is nothing for the Epoxy to bond to. The latex is creating a "bond breaker." You will need to use a water based or water born sealer with at least 20% solid acrylic. DO NOT USE solvent based sealers over latex. It will wrinkle the latex.
No because latex paint will no stick to the oil stain. unless you sand the surface first then pain it
Dont mix linseed oil and latex primer. Latex = Waterbased, Linseed Oil = Oil based Don't mix oil and water, unless you are making salad dressing.
Yes, you can apply polyurethane over oil-based stain.
No, it is not recommended to use water-based polyurethane on oil-based stain as they are not compatible and may not adhere properly. It is best to use a polyurethane that is compatible with the type of stain you have used.
Yes, you can apply oil-based polyurethane over oil-based stain.
Yes, you can use oil-based polyurethane over water-based stain. Make sure the stain is completely dry before applying the polyurethane for best results.
Yes, you can use a water-based polyurethane over an oil-based stain. Make sure the stain is fully dried before applying the polyurethane for best results.
Yes, you can use water-based polyurethane over oil-based stain. Make sure the stain is fully dried before applying the polyurethane for best results.
Yes, you can stain over oil-based polyurethane, but it is important to properly prepare the surface by sanding it lightly before applying the stain. This will help the stain adhere better to the polyurethane finish.
Yes, you can apply water-based polyurethane over an oil-based stain, but it is recommended to allow the stain to fully dry and cure before applying the polyurethane for best results.
Yes, you can apply a water-based polyurethane over an oil-based stain, but it is recommended to allow the stain to fully dry and cure before applying the polyurethane for best results.
Yes, you can apply water-based polyurethane over oil-based stain, but it is recommended to allow the stain to fully cure before applying the polyurethane to ensure proper adhesion and finish.
Yes, you can apply Minwax water-based polyurethane over oil-based stain. Make sure the stain is fully dried before applying the polyurethane for best results.
Yes, you can apply water-based polyurethane over water-based stain for your project.