answersLogoWhite

0

No. You can use lacquer on oil too. Varnish will work well with oil stain as do any of the wax finishes

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Art & Architecture

Can you put polyurethane over deck stain?

Can you put stain in polyurethane to darken the color?


Can you use latex stain over polyurethane enforced oil based stain?

Yes, but only if the stain is a few years old and really dry. You have to wash the stain thoroughly to remove the chalked pigments and then prime it to seal the checks in the wood. One disadvantage of stain is that it will not keep the wood from checking as it dries. Either a latex of alkyd primer will work well. You can then paint it with your latex top coat.


How do you remove polyurethane from a stain door without removing the stain?

You don't. You will most likely have to restain after stripping.


How do I refurbish a mahogany coffee table?

First, remove the old finish by sanding or using chemical strippers. Next, use a grain filler that either contrasts with the natural color of the table or the color you intend to stain the table. Next, select a stain and apply it to the table. Finally, select a top-coating like water-based polyurethane and apply a coat.


Can you apply an polyacrylic water base finish to an oil base stain?

I am doing that right now. It says on the can that it can be applied over an oil based stain...but the stain may continue to "amber" under the coating. I decided to go with the polyacrylic because a friend told me that polyurethane yellows over time. I don't know if that is true...but that is what I decided to do. So far, the acrylic is going over and drying over the oil based stain without any problems.

Related Questions

Can I use Polycrylic over oil-based stain for my project?

No, it is not recommended to use Polycrylic over oil-based stain for your project. Oil-based stains require a polyurethane finish, not Polycrylic.


Can you stain over oil-based polyurethane?

Yes, you can stain over oil-based polyurethane, but it is important to properly prepare the surface by sanding it lightly before applying the stain. This will help the stain adhere better to the polyurethane finish.


Can I apply water-based polyurethane over oil-based stain?

Yes, you can apply water-based polyurethane over oil-based stain, but it is recommended to allow the stain to fully cure before applying the polyurethane to ensure proper adhesion and finish.


Can I apply oil-based polyurethane over oil-based stain?

Yes, you can apply oil-based polyurethane over oil-based stain. Make sure the stain is completely dry before applying the polyurethane to ensure proper adhesion and a smooth finish.


Can you use water-based polyurethane over oil-based stain?

Yes, you can use water-based polyurethane over oil-based stain, but it is recommended to wait for the stain to fully dry before applying the polyurethane to ensure proper adhesion and a smooth finish.


Can you use oil-based polyurethane over water-based stain?

Yes, you can use oil-based polyurethane over water-based stain. However, it is recommended to allow the stain to fully dry before applying the polyurethane to ensure proper adhesion and a smooth finish.


Can you stain on top of polyurethane for a new finish?

No, you cannot stain on top of polyurethane for a new finish. Stain needs to penetrate the wood, and polyurethane creates a barrier that prevents this.


Can you use water-based polyurethane on oil-based stain?

No, it is not recommended to use water-based polyurethane on oil-based stain as they are not compatible and may not adhere properly. It is best to use the same type of finish as the stain for best results.


How long should I wait for an oil-based stain to dry before applying water-based polyurethane?

You should wait at least 24 hours for an oil-based stain to dry before applying water-based polyurethane. This allows the stain to fully cure and ensures a smooth finish when applying the polyurethane.


What is the best finish to use over an oil-based stain for optimal results?

For optimal results over an oil-based stain, the best finish to use is a clear polyurethane varnish.


Can I apply polyurethane over stain for a smooth and durable finish?

Yes, you can apply polyurethane over stain to achieve a smooth and durable finish.


Can I put polyurethane over stain for a smooth and durable finish?

Yes, you can apply polyurethane over stain to achieve a smooth and durable finish.