You can in some cses, but Minwax does not reccomend it.
Enamel is a word used to describe a finish, not the formulation of a paint. It simply means a hard reflective surface. Many people mistakenly use the word enamel when referring to oil based paints. So. if you are asking if you can paint latex or acrylic paint over a latex or acrylic enamel the answer is yes, however, I strongly recommend you sand the old paint first to give the top coat "tooth". If you are asking about painting latex or acrylic over an oil based paint the answer is still yes, however you must first sand the old paint and apply a good quality primer to it. Check with a reputable paint retailer for the best brand in your area.
Not directly. You will need to use a primer made to adhere to oil and will accept a latex topcoat.
You can use either enamel (oil-based) paint or latex (water-based) paint. If you are using latex paint, you need to use a primer (undercoat) first. The paint store will have a special primer that allows you to paint latex over enamel. If you are going to do this, it is also a good idea to either sand the enamel paint before you paint over it, or wash it with TSP (trisodium phosphate) cleaner to remove the gloss.
If you are painting a residence the chances are your enamel is a water borne acrylic enamel. Conversely, if you are referring to acrylic and enamel spray cans then the answer is yes you can spray one to another without any problems. Always be sure your paint is completely dry before applying successive coats.
You can use either a water or oil-based paint over a latex primer.
Yes, you can, the base is similar.
Yes, Polycrylic can be applied over oil-based stain.
No, it is not recommended to use Polycrylic over oil-based stain for your project. Oil-based stains require a polyurethane finish, not Polycrylic.
Enamel is a word used to describe a finish, not the formulation of a paint. It simply means a hard reflective surface. Many people mistakenly use the word enamel when referring to oil based paints. So. if you are asking if you can paint latex or acrylic paint over a latex or acrylic enamel the answer is yes, however, I strongly recommend you sand the old paint first to give the top coat "tooth". If you are asking about painting latex or acrylic over an oil based paint the answer is still yes, however you must first sand the old paint and apply a good quality primer to it. Check with a reputable paint retailer for the best brand in your area.
No, it will not stick properly.
Yes, you can apply polycrylic over oil-based stain, but it is important to ensure that the stain is completely dry before applying the polycrylic to prevent any issues with adhesion or drying.
Not directly. You will need to use a primer made to adhere to oil and will accept a latex topcoat.
You can apply "oil" based polyurethane over "oil" based enamel, you can also apply "water" based polyurethane over "water" based enamel, never mix the two, there's to much of a chance for problems.
Yes, you can apply polycrylic over oil-based stain for a protective finish. Make sure the stain is fully dried before applying the polycrylic, and follow the manufacturer's instructions for best results.
You can use either enamel (oil-based) paint or latex (water-based) paint. If you are using latex paint, you need to use a primer (undercoat) first. The paint store will have a special primer that allows you to paint latex over enamel. If you are going to do this, it is also a good idea to either sand the enamel paint before you paint over it, or wash it with TSP (trisodium phosphate) cleaner to remove the gloss.
It will protect the paint as long as you use a water based varnish, never use oil based varnish over water based paint. Tip: "water based enamel= water based finish". "oil based enamel= oil based finish".
If you are painting a residence the chances are your enamel is a water borne acrylic enamel. Conversely, if you are referring to acrylic and enamel spray cans then the answer is yes you can spray one to another without any problems. Always be sure your paint is completely dry before applying successive coats.