The head, along with everything above it, will have to be removed. If the engine overheated then the head could be warped as well.
No risk just make sure head is not warped before replacing gasket Is this a quad 4 motor????????????????????
replace the head gasket
No. You need to remove the head(s) and have the head(s) checked for cracks and straightness, then install the head(s) with new head gaskets. Most head gasket manufactured are assembled dry, no sealants.
You can change the head gasket by removing the valve cover. Remove the gasket and clean the gasket surface. Put the new head gasket on the cleaned surface.
A head gasket is a gasket the separates the cylinder head and the block. It separates the coolant passages, cylinders and oil passages. There are many other posts on this page that will provide more details. The head gasket provides a seal between the head and the engine block.
No risk just make sure head is not warped before replacing gasket Is this a quad 4 motor????????????????????
replace the head gasket
no
yes
That isn't likely. Most head gasket failures are caused by overheating. Not changing the oil will cause the motor to sludge up and increase the wear on the internal parts.
what size motor?
Change it
around 1 grand
1700.00
Yes
You pull the head off and change the head gasket. There is no treatment for a blow gasket, exept changing it. Its a pretty huge job I would suggest getting it at the garage and get a quote.
No. You need to remove the head(s) and have the head(s) checked for cracks and straightness, then install the head(s) with new head gaskets. Most head gasket manufactured are assembled dry, no sealants.