yes you always glue on the tiles first. or what ever you are using. then i would wait a 24 hrs to dry. then you can do the grouting.
Ancient peoples have been making glue from sap, vegetables and charcoal for thousands of years. There are many different formulations. -Before that, I would guess they had no easy ways of joining things.
If the glue was a good glue then you will damage the wood before the glue lets go. Glue goes into the pores of the wood and holds tight. Usually to separate the two pieces you would need to saw them apart. This would give you a smoother separation.
Yes, PVA glue is a liquid, it's in white glue, Elmer's glue and Yellow glue.
You cannot. A glue stain, or any stain will show through clear varnish. It is always better to try and remove all stains or marks before varnishing. Almost every glue has a solvent that will remove it.
Yes, white glue or yellow glue will do that.
If it's only a bit of glue you're referring to that's fine. You woulldn't want to grout over a continuous run of it.
A PVC pipe glue will take at least 4 hours to dry. 12 hours before putting water pressure in it.
The putting on of glue
To ensure a strong and durable bond between tiles when applying glue grout, the best techniques include thoroughly cleaning the surface, using the right type of adhesive, applying the grout evenly and pressing the tiles firmly into place. It is also important to allow sufficient drying time for the grout to set properly.
Glitter and glue are all I can think of :)
Mighty Bond Glue or Super Glue can be used to repair broken dentures. However, this method should only be used as a temporary fix and it is imperative that you give the glue plenty of time to dry before putting the denture back in your mouth.
it starts by putting glue on paper
You scrape away the original glue and re-glue it with a vinyl glue, then stick it o the wall. Don't let water run or spray over it for at least 2 days, then grout it.
by putting it down your pants then sticking it in!
by putting super glue
Sounds pretty scary to me, I wouldn't want to risk putting any Krazy glue in my mouth.
To effectively use glue for screws in woodworking projects, apply a small amount of wood glue to the screw threads before inserting them into the wood. This will help create a strong and durable bond. Make sure to wipe off any excess glue to prevent messiness. Additionally, allow the glue to dry completely before putting any weight or stress on the joint to ensure a secure connection.