u probably should, either way would work but to acheive the best look i would go ahead and sand 'em
It is strongly advised to sand your dresser before painting if you want a uniform coat.
Yes, you will need to sand the wall again and repaint with vinyl to get a smooth finish.
Painting isn't going to cover them, it is just going to give them color. You need to mud and sand them smooth, then prime before you paint.
Sand well first with 600 grit wet 'n dry. Then use a good primer coat before painting.
Yes, you can - but unless you sand or roughen the original paint first, the second coat may not adhere properly. If you are re-painting, you don't need to remove all of the original paint. But making the surface rough will help the new paint stick to the old paint.
Stairs of Sand was created on 1929-06-08.
You can repaint anything. You should sand the surfaces to smooth out the wood and to create a porous surface. Clean any dust or crud off of the stairs before painting again. If you are going to stain the surface, then you will have to remove the paint first. To do this, you can either strip or sand the stairs.
If you need a tole painting teacher in Sand Point, visit www.craftsitedirectory.com
Stairs of Sand - 1929 was released on: USA: 8 June 1929 Austria: 1930
To build stone stairs on a hill, you will need to first plan the layout and design of the stairs. Then, dig out the area where the stairs will go and create a sturdy base using gravel and sand. Next, place the stones in position, making sure they are level and secure. Finally, fill in any gaps with more gravel or sand to ensure stability.
It is strongly advised to sand your dresser before painting if you want a uniform coat.
Tools would be needed to make cave paintings: sand water hands skills you need to make a cave painting are: intelligance art skills
Unless you want a very rough paint look, you would need to scrape off the old paint, then sand down the surface to get a good, smooth result from painting.
healing ceremonies
healing ceremonies
Yes, it is recommended to sand plywood before painting it to ensure a smooth surface and better adhesion of the paint. Sanding helps to remove any rough spots, imperfections, and allows the paint to adhere more effectively.
A sand painting is a painting on a clay pot. This is known as fine art.