shifter
under the knob, there should be a locking nut on the shift rod. Loosen this and the knob should just unscrew
Saginaw 4 speed. It is an exact bolt in. Only change is you need a 4 speed shifter.
the switch is on the left hand side of the transmission about half way back of the transmission. it has two wires that plug into it.
Yes, but never trust them to work. Every six thousand miles the drums should be pulled off and brakes cleaned and adjusted. That is when the tires are off for a rotate anyhow.
No, it does not have aspartame.
the title on my '87 says 4700 lbs..
i think so a new chevy can surely fit one
under the knob, there should be a locking nut on the shift rod. Loosen this and the knob should just unscrew
Mercon III
Saginaw 4 speed. It is an exact bolt in. Only change is you need a 4 speed shifter.
If they are both 10 bolt, which means that 10 bolts holding on the rear end cover, and have 8.5" diameter ring gear.
depends, if it has over over a 100000 miles youd probly get around $2800-$3500 depending on what shape its in
A prescision phase shifter is use of circulr wave guide containing a lossless dielectric plate of length 21 called half wave (1800) section.
The relay is on the passenger's side of the firewall. If you have air conditioning they are side by side. They look like half circles from the top view.
Advanced Auto or Auto Zone usually carries them! O' Reillys is new but they might have them!
Half ton.
how do you remove the ignition switch on a 1990 chevy half ton pick-up?