0
Does a 1991 topaz have an automatic timing chain tensioner and how do you change it mine rattles at idle and some have thought it was a water pump pully?
Wiki User
∙ 16y ago
Check the harmonic balancer they had problems with the rubber insert going bad and causing the symptoms you are describing
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you change a serpentine belt on a 98 Dakota 4x4 with AC?
buy a belt, loosen the tensioner, replace belt
How do you change out ac belt for 2001 Tahoe?
The ac belt has a tensioner that is accessed from below, and takes a tensioner tool to loosen. Remove the serpentine belt, release tension on the ac belt then the belt can come off for replacement.
Can you change cars from automatic to manual in Forza 4?
i think so
Can i just change the timing chain tension 2002 sunfire?
Yes, you could. Is it a good idea? Probably not. If the tensioner is worn so must be the chain.
How do you change the fan belt on a 1992 Honda Accord and is it something that needs to be done by a professional?
No, it's not hard. There's a spring-loaded tensioner pully on the top of the engine. To make the job easier, get the largest socket wrench you can find or get some help. If your hand or the wrench slips, it shouldn't do any damage but it will scare you. Pull back on the tensioner with the socket wrench, the belt will loosen. Route the new belt exactly like the old one and ease the tensioner back down.
How do you change an automatic belt tensioner on a 1998 Chevy Malibu?
I have a 3.1L and there is just 1 screw that holds the tensioner in place.
Which bolt do you loosen to change the serpitine belt on a 1987 blazer?
Release pressure on automatic belt tensioner
How do you eliminate chirping noise from automatic tensioner of a ford 92 f250 pickup truck?
You will need to change it out. The bearing is failing.
How do you change the automatic belt tensioner on a 1995 V6 Chevy camaro?
Just remove the bolt that holds it to the front of the engine and take it off.
How do you change the fan belt on a 1994 1600i escort as there is no adjuster on the alternator only a spring loaded tensioner on the belt?
Use a 1/2 or 3/8 breaker bar to relieve tension on belt tensioner to remove and replace belt - the automatic belt tensioner is the only adjustment
Can you change the tension on a tensioner pully?
With a self adjusting tensioner pulley, there is no adjustment for tension.
How do you Change the tensioner?
Make and model required for an answer.
How do you tension the alternator belt on a rover 200 diesel?
If it's the 2ltr diesel it has an automatic spring loaded tensioner mounted down below the alternator. A bit tight for space down there if you need to change it.
How do you change the supercharger belt tensioner in 1997 Pontiac Grand Prix GTP?
How do you change the supercharger belt tensioner in 1997 Pontiac Grand Prix GTP?
How do you put a pulley on a tensioner in a 1998 dodge caravan?
You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.
How do you change the alternator on a 92 Geo Metro?
Where is the tensioner
How do you change a tensioner belt?
We need to know the year, make, model and engine size of the vehicle then we need to know if you want to change the belt tensioner or the belt or both.
