0
Metal and Auto Parts
Lacquer paint is very common in auto accessories and other metal pieces. It forms a strong bond and is durable. Cast models can be painted with a lacquer spray. These are required easier to work with and won't require as much work.
Wood and Furniture
Lacquer spray can be used wood and furniture. If the piece is large you may want to purchase lacquer in a can. This requires more work and preparation. Paints are painted in ventilated areas very carefully. Lacquer has specifically designed for furniture. It's usually not as heat resistant as the metal lacquers are, but are much easier to get to adhere to the wood.
Gloss Level
Lacquer paints can be visible in low mattee as well as in High Gloss finish.
High Gloss paints will look great in on car parts and on some furniture. The low matte will look less like a traditional lacquer finish but still gives the advantage of durability and strength.
What else can I help you with?
How do you seal pine knots?
Any good alcohol or lacquer based sealer will work. I use shellac if I'm staining and Kilz if I'm painting.
Does oil based stain require a polyurethane finish?
No. You can use lacquer on oil too. Varnish will work well with oil stain as do any of the wax finishes
What is lacquer work?
Lacquer-work is a highly skilled decorative art in which the artist shapes the wood using a hand operated lathe. Then several colors of lac are applied, design is then incised with sharp tools exposing the colors of the underlying layers.
Who are the authors in the painting American Authors of the 19th Century by Thomas Hicks?
The work that you refer to is a print made after the painting, as the painting is unlocated. Visit the following website for more information on the work as well as a key for "Authors of the United States": http://www.wjfc.org/picture.html The print in question is a focus of a chapter in my forthcoming dissertation on Hicks.
What is plenary painting?
A Plenary painting is a painting that is totally complete. It is considered a full, complete, finished work of art.
How do you seal pine knots?
Any good alcohol or lacquer based sealer will work. I use shellac if I'm staining and Kilz if I'm painting.
How can I Dissolve glue from metal?
You can add water since glue is soluble while metal is not.That may work, provided that the glues'solvent' is water. -It won't work if the glue is petroleum based and needs acetone, lacquer thinner or other solvents.
What spray can be used to waterproof material?
spray polyurethane is best, but lacquer will work as well, it is cheaper and dries in an hour versus 24-48, but you should apply multiple layers. 3 layers with poly, 6-10 with lacquer
What maintenance work can be done to extend the usefulness of metal fixtures?
regular painting extends life span of steel/metal product by reducing exposure to oxidizing (rusting). there are specific paints manufactured for prevention of oxidizing, these usually contain zinc or oxides. preperation prior to painting is the key to effectiveness of the painting. a well prepared surface will result in the paited finish lasting significantly longer
What does 5 gallons of lacquer weigh?
There are several different types of Lacquer available. As they work and weigh very differently this question in not answerable
We want to remove epoxy phenolic lacquer from tinplate sheet's The Tinplate sheet were first coated with lacquer and than heated at 190 degree Celsius.?
To remove epoxy phenolic lacquer from tinplate sheets, you can try using a mixture of solvents like methylene chloride or acetone. These solvents help break down the lacquer for easier removal. It's recommended to wear protective gloves and work in a well-ventilated area when using these chemicals.
Does oil based stain require a polyurethane finish?
No. You can use lacquer on oil too. Varnish will work well with oil stain as do any of the wax finishes
Can you stain over lacquer?
Probably, but it would work best if you sand the furniture first...
When was Work - painting - created?
Work - painting - was created in 1865.
What is lacquer work?
Lacquer-work is a highly skilled decorative art in which the artist shapes the wood using a hand operated lathe. Then several colors of lac are applied, design is then incised with sharp tools exposing the colors of the underlying layers.
Who is Jim fogarty?
Jim Fogarty is an artist living in Orkney. Originally specializing in highly detailed pencil artwork, Jim then moved on to customizing electric guitars and became very well known for this kind of work. He then moved on to metal sculpture work and wall painting which is the kind of work he now concentrates on. His work can be seen on his website at - http://www.jimfogarty.co.uk
How does the army tank work?
Well it has strong in it and the metal tires and it has steeing in it tha's all
