In most cases - Yes
The alternator, water pump, power steering pump, air conditioner and possibly the air pump receive power from the serpentine belt.
Check the power steering pump for fluid as well as make sure that the pump is working and the belt it tight. If the pump is not working then the steering will be hard to turn.
first thing is you need to pull off the belts, and yes all of then because the stering belt in behind the others. then there is two bolts holding the pump so remove them and then just remove the high and low pressure lines and your done.
the belt you are asking about is the one on the front of the engine it turns the alternator & power steering pump.
The power steering and the power brakes share the same pump. The pump belt may be loose, the system may be low on fluid in which case you have a leak somewhere or the pump may be faulty.
To change a power steering belt on a Rover 214, unbolt the power steering pump and pry the belt off the pulley. Replace with another steering belt and reinstall the steering pump.
The Kia Sedona does not have a power steering belt. The power steering pump is electronic and does not require a belt.
how to change the power steering pump belt on a 1992 jetta
Remove the power steering pump hose. Remove the power steering pump belt. Remove the power steering pump retaining bolts. The power steering pump will come off.
What have to do replace the belts water pump power steering
Secure the power steering pump with the retaining bolts. Attach the power steering hose to the power steering pump. Put the belt on to the power steering pump. Fill the power steering system with fluid.
Remove the belt for am your power steering pump. Remove the power steering pump hose. Remove the power steering pump retaining bolts. Reverse the process to install your new power steering pump.
Begin by removing the belt from your 1994 Chevy Suburban power steering pump. Remove the power steering pump hose. Remove the power steering pump retaining bolts. The power steering pump will come off.
Begin by removing the power steering pump belt. Remove the power steering pump hoses. Remove the power steering pump retaining bolts. Reverse the process to install your new power steering pump.
The power steering pump belt is located on the drivers side of the car. It runs parralell to the alternator / a/c belt, right above it. There is a pulley just above your alternator, the belt on this pulley is your power steering pump belt.
Yes, you can expect a car that has a serpentine belt to lose power steering when the belt breaks because the belt goes around the power steering pump's pulley.
IS the belt turning the power steering pump backwards