How big the squares should be on a 15x20 inch checkerboard will depend upon how many squares a person will put on the board. For most checkerboards, the squares will be approximately one-inch in diameter.
maria is making a scale drawing of her basement which is 12 yards long If she lets half inch represent 1 yard how many inches long should she makes the drawing?
You can use a bolt and lock nut, probably 1/4 inch.
A map with 2000 miles per inch would cram more things into the inch than one that uses 1 inch for 1000 miles. So the map with the scale of 1 inch for 1000 miles would show more detail.
The door speakers are either 5.25 inch or 4 inch The other speakers are 6.5 X 9 inch
0.3344 square inch
For a 20-inch bike, you should use a 1/2 inch pitch chain with 1/8 inch width.
it should have 1 inch to 3/4 inch slack in it
If you have a hard time seeing, you should get the 12 inch. Otherwise, it's up to you.
1/4 inch per foot.
For 1/2 inch plywood, you should use 1 inch pocket hole screws.
10 inch or 11 inch
According to MLA standards, the top right and left margins of your works cited list should each be set to 1 inch. The entire document should have 1-inch margins on all sides.
For 3/4 inch wood, you should use 1 1/4 inch pocket hole screws.
A 20 inch tire.
For the passage of furniture should turn.
One half inch is half of one inch (½ inch) - approximately 1.27 cmThis should not be confused with one and a half inch which is 1½ inches - approx 3.8 cm
28 mil is 28/1000 inch (0.028 inch)