How do change front turn signal on a 2008 Kia sedona?

Answer 1

If the turn signal housing is the 2007 van, there is a small gray tab on the fender side just inside the black housing. You can take a flat head screw driver and gently push the tab towards the front of the grill. The whole assembly should now hinge forward toward the bumper and easily come out. Twist out the appropriate bulb sockects and replace the bulbs (3157 for turn signals and 194 for marker lights). Reverse the procedure and the housing should just 'click' back in. hope that helps

Answer 2

Open the hatch on the side of each lamp you will find a plastic plug pull these plugs out and the whole lamp assy will come out . twist the burnt out bulb and replace , causion these are Special bulbs Not ordinary lamps from yesteryear. Auto Zone carries them also other big name auto parts stores. Good luck

Answer 3

You have to remove the entire headlamp assembly from the vehicle to access the headlamp bulb. Not too difficult, just 3 or 4 screws I think. Everything is pinned, or keyed, so you don't have to readjust the assembly after replacing the bulb & attaching the headlamp.

Answer 4

you have to remove the headlights to get to the parking/running lights. On top of the headlights there are 2 retaining pins, one left, one right, that the top of the pins are held under a plastic lip. Swivel from under the lip and lift the pin out...kinda like a pin in a hinge. Then the headlights pull straight out. disconnect both electrical plugs. Now inside the parking light assembly on the outer edge is a piece of plastic that holds the assembly under tension. Push it outwards. The inside retaining edge of the assembly will slide outwards (left or right) allowing you to get to the back of the lights. Push the plastic retaining clip down on the back of the light socket and 1/4 rotation counter clockwise....change bulb....reverse the order and put it back in.

Answer 5

2000 Nissan Frontier back up light bulb replacement: Purchase the correct replacement back up light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the back up light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).

Answer 6

2007 Kia Sorento headlight bulb replacement: Purchase the correct replacement bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).

Answer 7

2008 Kia Sedona bulb replacement: Purchase the correct replacement bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the replacement procedure. The owner's manual is the best place to start for bulb replacement. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).