If it is throtle body equipped, the idle control s solonoid controls it. If it has a carb there is an adjustment screw on the bottom of the carb.
A 1988 Toyota Corolla might run well one day and rough another day because of temperature changes that cause the vehicle to have leaks in the seals or gaskets. This might also be due to bad gasoline purchased the second day or even water in the gasoline. A clogged fuel filter might even cause this issue.
Correct wiper blade size depends on the year of the Toyota Corolla. Once you have the make, model and year then look-up the correct wiper sizes. See related links to lookup some options for any year corolla.
You can find a 1988 Toyota carburetor diagram at most Toyota dealerships. The diagram can also be found in Toyota service manuals at your local library.
My 1987 corolla fx took 11.4 to fill on a pretty empty tank.
Check spark timing and plug gap. Service the carburettors.
how to do ignition timing on 1988 Toyota corolla fx
torque specs on head gaskets 1988 toyota corolla 4A-F
R12
A chain. Every Corolla since 1988 has a chain
It is a vacuum line diagram for a 1988 Toyota Corolla. What else would it be. :-) Just playing. You can find one [http://www.themotorbookstore.com/corolla2.html Here]
it is stamped on the passanger door lock
try www.autozone.com
Yes, Toyota has no peers in relaiablity and holding value no matter the year
You can find fuel line routing information for your 1988 Corolla in Toyota service manuals. The Toyota service manuals can be purchased from most auto-parts stores.
it is in the tank follow your rear fuel lines
The MAP sensor is located on the engine compartment on 1988 Toyota Corolla. The MAP sensor can be purchased at any auto parts store.
Inside the distributor cap under the rotor.