answersLogoWhite

0

1. Remove one battery Terminal. Remove front of engine top plastic cover-2 plastic screws and a push pin.

2. Rotate Tensioner Pulley to remove belt from Alt only. Just let it hang underneath.

3. Remove white overflow bottle by just pulling it up and hanging over front of car. Leave the hose attached.

4. Remove the small bolt under Power Steering Fluid Resevoir. This gives you room to extract Alt.

5. Remove 2 bolts holding Alt in place.

6. Rotate Alt so you can get to power cable. Pull back rubber housing, remove nut.

7. Pull back rubber cover and Squeeze side of plastic electrical connection and pull out. Do not damage. It can be tight from being in there for so long.

8. Slowly extract Alt to left of engine. You may have some minor interference from hoses that require you to push or adjust slightly. Carefully wiggle it around, it will fit.

Now reverse the whole process.

User Avatar

Wiki User

12y ago

What else can I help you with?