To change the front wheel bearing on a Citroën Picasso, first, lift and secure the vehicle, then remove the wheel and brake components. Next, detach the hub assembly by removing the bolts and using a puller if necessary to extract the bearing. Replace the old bearing with a new one, reassemble the hub and brake components, and finally, reinstall the wheel. Always ensure to follow specific torque settings and procedures outlined in the vehicle's service manual for safety and precision.
Although there is a snap ring retaining the bearing, you will need to take the strut to a mechanic and have the bearing pressed out. If you take out the three bolts on the top of the strut tower, and disconnect the ball joint at the bottom, you won't have to worry about throwing the alignment out.
The thrust bearing in most engines.the cam bearing
The front wheel bearing assembly by Moog from Advance Auto Parts, $150. Labor 1 to 1 1/2 hours.
44649 Yup, and its got two.
Take off the steering knuckle and press out the bearing and hub.Have the new bearing pressed in with the hub and re install the knuckle.
One may want to enlist the help of a professional to change the front brake disc on a Citroen Xsara Picasso. It can be a tough job and dangerous if not done correctly.
how u do u remove a wheel bearing on a citroen xsara
You can replace the front bearing on 2003 Citroen Relay using air tools.
Psi 36 for C4 Grand Picasso, front and rear.
35 front and back.
It's under the n/s front light.
35 front and back.
According to the manual,you have to remove the front bumper
Replace front sidelight bulb on Citroen C4 how to?
that wouldn't be very smart would it? you'll have to drive it while standing.
how do i change front wheel bearing of kia sorento 2003
How do you change a 1998 jimmy 4X4 front wheel bearing ?