"Shutter Angle" refers to rotary shutters used in motion picture cameras, a lower shutter angle (in degrees) means less light is allowed to expose the film and less motion blur is captured, higher angle and more light is let and more motion blur appear on flim. 180 degrees or 1/48th of a second (at 24 fps) is considered normal. The shutter angle is controlled by the shape of the rotary shutter, some cameras allow you to change the shape of the shutter or swap out for different shape shutters. Some newer or high-end cameras allow you to change the shape of the shutter while still in-camera. Your question was filed under Photography, so possibly you mean "shutter speed" if your camera allows for manual control of the shutter speed it will be in 1/Nth of a second increments. A shutter speed of 1/125th of a second was taught to me as a good shutter speed to start at for medium focal lengths for a beginning shooter - to avoid blurry pictures. Also, if you're trying to freeze water in motion, birds in flight or people in motion, a high shutter speed will work well. Above 1/500th or 1/1000th of second if your camera is capable will create the desired effect. To answer effectively we probably need to know the model of camera you are using, and the purpose, happy shooting!
If the camera has a "shutter priority mode", usually called "S mode", then the shutter speed is controlled directly by the user when the camera is in this mode, by moving a dial or pressing a button (or both). If the camera has a "manual" mode, usually called "M mode", then the shutter speed and aperture are both controlled directly by the user by moving dials or pressing buttons (or both). Some cameras have automatic modes which allow the user to control the minimum and maximum shutter speeds that will be selected by the camera when considering all other factors. If the minimum shutter speed is reached, the camera will increase the ISO or aperture size to compensate for under-exposure. If the maximum shutter speed is reached, the camera will decrease the ISO or aperture size to compensate for over-exposure.
Answer 1A very brief and very over-simplified description is that a camera is: 1. a "box"2. with a light sensitive media [film or electronic light sensing grid] at the back side,3. with an opening [lens or pin hole] at the front to admit light from a subject and to form an image on the media,4. and a method [a diaphragm to control the intensity of the light, and a shutter to control the length of time the light is allow to strike the media] of controlling the amount of light getting to the media.
The slower the film -- that is, the lower the ISO rating -- the longer the shutter must stay open at a particular aperture (F-stop). In low light with slow film, the shutter may have to stay open too long for the camera to be hand-held without noticeable camera shake, even with cameras with optical image stabilization.
Exposure is the combination of shutter speed and aperture used to expose the image sensor in a digital camera. When the image sensor receives the right amount of light, your picture comes out correctly exposed. The camera's light meter determines how big to open the aperture (the hole to allow light in) and for how long (the shutter speed). If the image sensor receives less light than it requires, your picture comes out under-exposed. If the image sensor receives more light than it requires, your picture comes out over-exposed.
Over the shoulder shot, mostly used for interviews, not for discussions. This shot can be used for either the interviewee or the interviewer. If it is a picture of the interviewer, you do not need audio, as you will use audio from the interview, and use this as a cut away.
A mechanical shutter physically opens and closes to control the exposure time of a camera, while an electronic shutter uses sensors to capture images without moving parts. Mechanical shutters offer more precise control over exposure, while electronic shutters are typically quieter and allow for faster shutter speeds.
An electronic shutter in a digital camera is a mechanism that controls the exposure time of the image sensor electronically, without any physical movement. This differs from a mechanical shutter, which physically opens and closes to control the exposure time. Electronic shutters are typically faster and quieter than mechanical shutters, allowing for more precise control over exposure and reducing the risk of camera shake.
If the camera has a "shutter priority mode", usually called "S mode", then the shutter speed is controlled directly by the user when the camera is in this mode, by moving a dial or pressing a button (or both). If the camera has a "manual" mode, usually called "M mode", then the shutter speed and aperture are both controlled directly by the user by moving dials or pressing buttons (or both). Some cameras have automatic modes which allow the user to control the minimum and maximum shutter speeds that will be selected by the camera when considering all other factors. If the minimum shutter speed is reached, the camera will increase the ISO or aperture size to compensate for under-exposure. If the maximum shutter speed is reached, the camera will decrease the ISO or aperture size to compensate for over-exposure.
In aperture priority mode, you set the aperture and the camera automatically adjusts the shutter speed for proper exposure. In manual mode, you have full control over both aperture and shutter speed settings, giving you more creative control but requiring you to manually adjust both settings for proper exposure.
Shutter Angle refers to the length of time film is exposed in a motion picture camera, based on the shape of the rotary shutter. 180 degrees is considered normal (when shooting at 24 frames per second). This means the film is exposed for 180 degrees or half of the rotation of the shutter or 1/48th of a second. The primary purpose of changing your shutter speed is controlling how much motion blur is captured. The slower the shutter (the larger the shutter angle), the more motion blur. In some video cameras you can crank your shutter speed higher to create a stop-motion effect or slow your shutter to 1/30th or 1/24th and create a blurring effect for specific shots. I have also heard of people using a slower shutter because it looks more "filmic" this is a matter of taste. All video cameras (to my knowledge) that allow for manual control of the shutter speed give these controls in 1/Nths of a second (1/48th, 1/60th). If you are shooting with a conventional video camera in the United States or another NTSC country your typical shutter will be 1/60th, meaning each frame was captured over 1/60th of a second. For Europe and Asia, along with most of Africa, South America, Australia your shutter will be 1/50th. Some newer digital video cameras targeted towards digital cinema allow you to display your shutter speed in degrees, as if you were controlling shutter angle (Panasonic AG-HVX200 as an example). Also they allow you shoot at 24 frames per second and to use shutter speeds that fit closer with that frame-rate, like 1/24th, 1/48th.
You mean a "program" camera? There are three forms of automatic exposure: aperture-priority (usually marked "Av" - aperture value - on the camera's control knob), shutter priority (usually marked "Tv" - time value) and program. When you use aperture priority you set the f/stop and the camera picks the shutter speed to give the proper exposure. In shutter priority you pick the shutter speed and the camera picks the f/stop. In program mode the camera picks both.The disadvantage of program exposure is it takes control of the image out of the hands of the photographer.The advantage - and there is a huge one - is it lets the photographer worry about composing the picture without worrying about setting the camera. I know newspaper photographers. When they go to a fire or a crime scene, they hang the fastest lens they have on their cameras, set them to "high speed program" and go shoot. This gets them the most usable images and leaves them free to worry about more important things, like not getting run over by a fire engine.
To capture stunning images of snowfall using long exposure photography techniques, set up your camera on a stable surface or tripod, use a slow shutter speed (around 1-30 seconds), and adjust the aperture to control the amount of light entering the camera. Experiment with different settings to achieve the desired effect, and consider using a remote shutter release to minimize camera shake. Additionally, try shooting in manual mode to have more control over the exposure settings.
To take pictures effectively with a DSLR camera, follow these steps: Understand the basic functions of your camera, such as aperture, shutter speed, and ISO settings. Use manual mode to have more control over your settings. Pay attention to lighting and composition. Use a tripod for stability. Practice and experiment with different settings to improve your skills.
To take pictures effectively on a Canon camera, first, familiarize yourself with the camera settings and functions. Use manual mode for more control over settings like aperture, shutter speed, and ISO. Pay attention to lighting and composition, and consider using a tripod for stability. Experiment with different angles and perspectives to capture unique shots. Practice and review your photos to improve your skills over time.
When choosing a film camera for photography, look for features like manual controls for aperture, shutter speed, and focus, a reliable light meter, interchangeable lenses for versatility, and a sturdy build for durability. These features will help you capture high-quality images and have more control over your photography.
Most companies call these shutters "leaf shutters." It's a shutter that's built into the camera lens. It has two advantages and three disadvantages over a focal plane shutter.The advantages are every shutter speed is a flash sync speed, and every lens contains a shutter of its own so if the shutter on your 80mm lens breaks you can mount your 150mm lens and finish the job. The disadvantages are slower shutter speeds than focal plane shutters will give (Hasselblad 500-series cameras go to 1/500 second and Hasselblad H-series go to 1/800; my Nikon F4 goes to 1/8000), having the shutter in the lens means you have to buy a new shutter with every lens and they are NOT cheap; and at the same shutter speed a focal plane shutter will allow more light to pass, so if you have a handheld meter you have to adjust your exposure to accommodate this.
Answer 1A very brief and very over-simplified description is that a camera is: 1. a "box"2. with a light sensitive media [film or electronic light sensing grid] at the back side,3. with an opening [lens or pin hole] at the front to admit light from a subject and to form an image on the media,4. and a method [a diaphragm to control the intensity of the light, and a shutter to control the length of time the light is allow to strike the media] of controlling the amount of light getting to the media.