Install an efficient pump and filter set.
It is recommended that you use gravel on the base of the tank since, it is a natural purifier.
Depending on the colour and dirt of water and the activeness of the fish, the water should be changed regularly.
an aquaruim is a place where fishes are placed with water inside it.
True because it is an acid, which is, on the pH scale, pH 1-6. Once merged with water, it will lower pH to about pH 4-5; and raise substance levels.
"aqua" is a root that means either a bright blue or water. Words beginning with aqua are aquatic aquarium aquarelle aquamarine aquatint...
You may be able to stop disease by drinking ph balanced water. There is a water filter machine that can ph balance the water and it runs about 4,000.
Not at all. Humans carry sea water inside them. That's the "normal saline" in IVs.
My junk
hello
The ideal pH level for maintaining a healthy aquarium water pH is typically between 6.5 and 7.5. This range is suitable for most freshwater fish and plants to thrive in a stable environment.
check wiki
You will need to test the PH, KH & GH to find out whether your water is soft or hard. If your PH changes easily in the tank, then you can add crushed coral to help it rise and be stable, or peat moss to help it lower and be stable
usually there is a kit you can get for aquariums There are things available called pH Buffer Blocks. You simply drop one in the corner of the tank so that it gets a bit of current from the filter inlet or outlet and it will keep the pH steady.
To adjust the pH level of your aquarium water to make it more acidic, you can add substances like peat moss, driftwood, or commercial pH-lowering products. These can help lower the pH and create a more acidic environment for your fish. It's important to monitor the pH levels regularly to ensure they stay within the appropriate range for your aquarium inhabitants.
Buffers are important because they control the PH or "acidic" balance.
It is important for a fish aquarium owner to purchase a ph probe for their tank. It helps measure the pH levels in the water. Certain types of fish will only survive in water with a certain pH level and one would need to know what their tank pH level is for their fish to survive.
There are a couple of things you can do to control the pH of the water for tropical fish. You can for example drain the water and start over.
PH can be easily changed. Many water sources around the world usually come from alkaline or hard water. In order to increase pH, you could use chemicals or put crushed rock and shells to make the water alkaline. In order to decrease the pH, you could also use pH, or inject CO2. Another way of decreasing pH is to add drift wood to the aquarium, though driftwood tends to make the water color tea like.
The best way is to control the harness and softness of the source water for the aquarium. If you need soft water, then use a water softener or reverse osmosis machine to lower the water hardness. If you need your water harder, then you can purchase remineralizing compounds that you can mix with water change water and then add to your tank. You can find remineralizers at www.bigalsonline.com. Look under Water Treatment > Ph Regulators & Buffers. I recommend Kent's R/O Right.