I have a Fiat punto 1998 1.2. With the back lights, theres 2 large holders screwed in just above the boot (inside) there will be a tool in your spare wheel holder to undo it, once both unscrewed you can take off the back light and unscrew to screws that holds on the lenses, besure not to drop it. once the 2 screws have been removed you can then release the bulbs and change them as required. just repeat backwards to replace and becareful not to loose the tool to undo the holders.
It depends on how many drawers are in the fridge. It also depends on whether you are stupid enough to freeze lightbulbs.
A compact fluorescent lamp (CFL), also called compact fluorescent light, energy-saving light, and compact fluorescent tube, is a fluorescent lamp designed to replace an incandescent lamp; some types fit into light fixtures formerly used for incandescent lamps. The lamps use a tube which is curved or folded to fit into the space of an incandescent bulb, and a compact electronic ballast in the base of the lamp.
One nice thing about light bulbs is that they provide light indoors and when it is dark outside, without having to light a candle or an oil lamp. They are also relatively safe, clean and easy to operate. Disadvantages include the fact that you will need electricity and wires that are properly installed and cannot be easily moved about. It is also difficult to repair a broken light bulb or one that has burned out, and they must be disposed of and replaced.
At present there are several types of light bulbs available for indoor domestic use.Arranged by their efficiency from least-to-most they are:Incandescent bulbs (60 watts)The old style light bulb emitting light from a hot filamentFluorescent tubes (30 to 40 watts)Several inch to several foot long tubes emitting light from a vacuum with a trace of Mercury vapour requiring a special fixtureCompact Fluorescent bulbs (15 watts)Roughly incandescent sized small fluorescent tubes designed to screw into standard light bulb fixturesLight Emitting Diode /LED's (5 watts)Small cool running lights using special mini-sockets or designed to fit into conventional sockets.Notes:Power requirements to provide as much light as a 60 watt incandescent bulb indicated in parenthesesBoth types of fluorescent tubes contain mercury and require special handling and disposal requirementsOutdoor lights would also include Mercury and Sodium vapour bulbs as well as high powered incandescent bulbs. These are more efficient than incandescent bulbs but the colour spectrum emitted and other aspects makes indoor use unlikely
In extremely old refrigerators an ordinary light bulb will fit. Be sure to use the smallest wattage you can. I believe normal fridge bulbs are 40W. The risk you run is they are not as rugged as a refrigerator bulb. It may break, causing glass to contaminate food. And a higher wattage could create enough heat that on busy days it may cause the temperature to rise enough to be a problem. When the door is closed the light is off, but if it is hot, the bulb takes a few moments to cool off and that may affect the cooling ability of the fridge.
No its different
No
yes
no way,Fiat although 4 stud has different dimensions im afraid.
Yes,they are the same,i have done this.
Peugeot 206 wheels generally will not fit a Fiat Punto due to differences in bolt patterns, offset, and center bore sizes. The Peugeot 206 typically uses a 4x108 bolt pattern, while the Fiat Punto usually has a 4x98 pattern. Additionally, even if the bolt pattern were compatible, other factors like wheel width and offset may not align properly, affecting handling and safety. Always consult a professional or refer to specifications before attempting to fit wheels from one model to another.
You standard size light bulbs will fit into them, just make sure they are the right style.
A Fiat Punto gearbox is not generally compatible with a Fiat Doblo van due to differences in engine configurations, mounting points, and overall design specifications. While both vehicles are from the Fiat brand, their gearboxes are engineered for different models and performance requirements. It's advisable to consult a professional mechanic or refer to specific compatibility charts for precise information.
The answer is no. The 1.2 Punto is not and interference fit and therefore the valves do not get damaged by turning over without a cam belt.
To fit the HT leads to the coils of a Fiat Punto, start by ensuring the engine is off and cool. Begin with the coil pack, connecting the leads in the correct firing order, which typically is 1-3-4-2 for the Fiat Punto's engine. Make sure each lead is securely attached to both the coil and the corresponding spark plug. Finally, double-check that the leads are routed correctly to avoid any contact with hot engine parts.
Yes, 206 wheels can fit a Fiat Punto, but it depends on the specific model and year of both vehicles. It's important to check the wheel specifications, such as bolt pattern, offset, and diameter, to ensure compatibility. Additionally, consider the tire size and ensure it aligns with the Punto's requirements to avoid any clearance issues. Always consult a professional or refer to a wheel fitment guide for accurate information.
yes