Vegetable works well. Any cooking oil will do. However, if that doesn't work, pure Clorox bleach will do the job immediately - just use a rag to rub the bleach on your hands (of course, protect any clothing or furniture that could be damaged by the bleach). Make sure to wash good afterwards with soap and water.
You can stain balsa wood.
Depending on what the wood is and how it has been processed, there may be a semi finished surface on it. Sanding lightly will open the pores and allow the stain to absorb more evenly. Will also remove any oil from your hands that may be on the surface.
Wood stain is abosorbed into the wood, so the wood takes on the color of the stain. This is why the features of the wood are still visible, unlike with paint.
No, it will not lighten stain, just add another layer. The only way I have ever been able to lighten stain is to sand it off carefully.
All of it. Otherwise the latex stain will seal the surface of the wood and the oil will not be able to penetrate into the wood. Sanding won't remove all of the residue. You'll want to use a paint stripper/stain remover too.
Carefully scrape with a razor blade
There are a few ways one can remove wood stain off of concrete. One way is to use a sandblaster to remove the stains. Another method is using wood bleach, water, and a scrubbing brush.
You can stain balsa wood.
Depending on what the wood is and how it has been processed, there may be a semi finished surface on it. Sanding lightly will open the pores and allow the stain to absorb more evenly. Will also remove any oil from your hands that may be on the surface.
Wood stain is abosorbed into the wood, so the wood takes on the color of the stain. This is why the features of the wood are still visible, unlike with paint.
No,Any kind of sealer you try to put on after will lift off the dried stain. And the exess stain, even when dry, will rub off on anything that touches it.If you can't get the color dark enough, they do make colored sealers you can spray or brush on.
Wood stain is for sealing and emphasising the natural colour of wood
NGR stain is a stain (the kind found in the paint aisle, not the kind on your shirt) that will not make the wood grain fibers rise up from the surface of the wood. Raised grain may have to be sanded off.
It will fade over time. Not much else you can do that won't hurt your skin.
No, it will not lighten stain, just add another layer. The only way I have ever been able to lighten stain is to sand it off carefully.
All of it. Otherwise the latex stain will seal the surface of the wood and the oil will not be able to penetrate into the wood. Sanding won't remove all of the residue. You'll want to use a paint stripper/stain remover too.
If you paint over the "weathered" paint, it will chip and cause the stain to come off. Also, the stain needs a clean sanded surface in order for the wood to absorb it. Otherwise, there is no reason to use stain.